ADCMP609 Datasheet, PDF (5/12 Pages) Analog Devices – Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator

PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
ADCMP609
V_CC 1
8Q
V_P 2 ^ADCMP609 7 Q
TOP VIEW
V_N 3 (Not to Scale) 6 V_EE
S_DN 4
5 HYS
Figure 2. ADCMP609 Pin Configuration
Table 4. ADCMP609 Pin Function Descriptions
Pin No. Mnemonic Description
1
VCC
VCC Supply.
2
VP
Noninverting Analog Input.
3
VN
Inverting Analog Input.
4
SDN
Shutdown. Drive this pin low to shut down the device.
5
HYS
Hysteresis Control. Bias with resistor or current source for hysteresis.
6
VEE
Negative Supply Voltage.
7
Q
Noninverting Output. Q is at logic low if the analog voltage at the noninverting input (VP) is greater than the
analog voltage at the inverting input (VN) provided the comparator is in compare mode.
8
Q
Inverting Output. Q is at logic high if the analog voltage at the noninverting input (VP) is greater than the analog
voltage at the inverting input (VN) provided the comparator is in compare mode.
Rev. 0 | Page 5 of 12