AD8642_15 Datasheet, PDF (5/16 Pages) Analog Devices – Low Power, Rail-to-Rail Output, Precision

Data Sheet
ABSOLUTE MAXIMUM RATINGS
Absolute maximum ratings apply at 25°C, unless otherwise noted.
Table 3.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage
Output Short-Circuit Duration
Storage Temperature Range
KS-5, R-8, RM-8, R-14, CP-16 Packages
Operating Temperature Range
Junction Temperature Range
KS-5, R-8, RM-8, R-14, CP-16 Packages
Lead Temperature (Soldering, 60 sec)
Rating
27.3 V
VS− to VS+
±Supply Voltage
Indefinite
−65°C to +150°C
−40°C to +125°C
−65°C to +150°C
300°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
AD8641/AD8642/AD8643
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages. This
was measured using a standard 4-layer board. For the LFCSP
package, solder the exposed pad to a copper plane, which
should be connected to V+.
Table 4.
Package Type
5-Lead SC70 (KS)
8-Lead SOIC (R)
8-Lead MSOP (RM)
14-Lead SOIC (R)
16-Lead LFCSP (CP)
θJA
θJC
Unit
430
149
°C/W
121
43
°C/W
142
45
°C/W
110
36
°C/W
81
16
°C/W
ESD CAUTION
Rev. E | Page 5 of 16