AD8611_15 Datasheet, PDF (5/20 Pages) Analog Devices – Single-Supply Comparators

ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Rating
Total Analog Supply Voltage
7.0 V
Digital Supply Voltage
7.0 V
Input Voltage¹
±4 V
Differential Input Voltage
±5 V
Output Short-Circuit Duration to GND
Indefinite
Storage Temperature Range
R, RU, RM Packages
−65°C to +150°C
Operating Temperature Range
−40°C to +85°C
Junction Temperature Range
R, RU, RM Packages
−65°C to +150°C
Lead Temperature Range (Soldering, 10 sec) 300°C
1_{The analog input voltage is equal to ±4 V or the analog supply voltage,}
whichever is less.
AD8611/AD8612
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
Table 4.
Package Type
θJA1
8-Lead SOIC (R)
158
8-Lead MSOP (RM)
240
14-Lead TSSOP (RU)
240
θJC
Unit
43
°C/W
43
°C/W
43
°C/W
1_{θJA is specified for the worst-case conditions, that is, a device in socket for}
P-DIP and a device soldered in circuit board for SOIC and TSSOP.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. A | Page 5 of 20