AD8192 Datasheet, PDF (5/28 Pages) Analog Devices – 2:1 HDMI/DVI Switch with Equalization and DDC/CEC Buffers

ABSOLUTE MAXIMUM RATINGS
Table 4.
Parameter
AVCC to AVEE
DVCC to DVEE
DVEE to AVEE
VTTI
VTTO
AMUXVCC
VREF_AB
VREF_COM
Internal Power Dissipation
High Speed Input Voltage
High Speed Differential
Input Voltage
Low Speed Input Voltage
I²C Logic Input Voltage
Storage Temperature
Range
Operating Temperature
Range
Junction Temperature
ESD HBM Input Pins Only
ESD HBM All Other Pins
Rating
3.7 V
3.7 V
±0.3 V
AVCC + 0.6 V
AVCC + 0.6 V
5.5 V
5.5 V
5.5 V
2.41 W
AVCC − 1.4 V < VIN < AVCC + 0.6 V
2.0 V
DVEE − 0.3 V < VIN < AMUXVCC + 0.6 V
DVEE − 0.3 V < VIN < DVCC + 0.6 V
−65°C to +125°C
−40°C to +85°C
150°C
±7 kV
±1.5 kV
AD8192
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a four-layer JEDEC circuit board for surface-mount
packages. θJC is specified for the exposed pad soldered to the
circuit board with no airflow.
Table 5. Thermal Resistance
Model
θJA
56-Lead LFCSP
27
θJC
Unit
2.1
°C/W
ESD CAUTION
Rev. 0 | Page 5 of 28