5962-87719 Datasheet, PDF (5/11 Pages) Analog Devices – Add case outline 2 Editorial changes throughout

Test
Power supply rejection
Power supply rejection
Power supply rejection
TABLE I. Electrical performance characteristics – Continued.
Symbol
PSRR
PSRR
PSRR
Conditions 1/
-55°C ≤ TA ≤+125°C
unless otherwise specified
G = 10 2/
G = 100 2/
G = 1000
Group A
subgroups
1
Device
type
01
Limits
Min Max
85
1
01 95
1
01 100
Unit
dB
dB
dB
1/ VS = ±15 V, RL = 2 kΩ, unless otherwise specified.
2/ Guaranteed if not tested to the limits specified.
3/ Gain error is a function of external resistors.
3.6 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an
approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DLA Land and
Maritime -VA prior to listing as an approved source of supply shall affirm that the manufacturer's product meets the
requirements of MIL-PRF-38535, appendix A and the requirements herein.
3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided
with each lot of microcircuits delivered to this drawing.
3.8 Notification of change. Notification of change to DLA Land and Maritime -VA shall be required for any change that
affects this drawing.
3.9 Verification and review. DLA Land and Maritime, DLA Land and Maritime’s agent, and the acquiring activity retain the
option to review the manufacturer's facility and applicable required documentation. Offshore documentation shall be made
available onshore at the option of the reviewer.
STANDARD
MICROCIRCUIT DRAWING
DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
E
5962-87719
SHEET
5