OP282ARMZ Datasheet, PDF (4/16 Pages) Analog Devices – Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

OP282/OP482
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage¹
Output Short-Circuit Duration
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature (Soldering 60 sec)
Rating
±18 V
±18 V
36 V
Indefinite
−65°C to +150°C
−40°C to +85°C
−65°C to +150°C
300°C
1 _{For supply voltages less than ±18 V, the absolute maximum input voltage is}
equal to the supply voltage.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Data Sheet
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device in
socket for PDIP. θJA is specified for a device soldered in the circuit
board for SOIC_N, MSOP, and WLCSP packages. This was
measured using a standard 4-layer board.
Table 3.
Package Type
θJA
8-Lead MSOP [RM]
142
8-Lead SOIC_N (S-Suffix) [R]
120
14-Lead PDIP (P-Suffix) [N]
83
14-Lead SOIC_N (S-Suffix) [R] 112
14-Ball WLCSP [CB]^{1, 2}
70
θJC
Unit
45
°C/W
45
°C/W
39
°C/W
35
°C/W
16
°C/W
1 _{Simulated thermal numbers per JESD51-9.}
2 _{Junction-to-board thermal resistance.}
ESD CAUTION
Rev. I | Page 4 of 16