OP250 Datasheet, PDF (4/16 Pages) Analog Devices – CMOS Single-Supply Rail-to-Rail Input/Output Operational Amplifiers

OP250/OP450
ABSOLUTE MAXIMUM RATINGS^{1, 2}
Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +6 V
Input Voltage² . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND to V_S
Common-Mode Input Voltage . . . . . . . . . . . . . . . . . . . . ± 6 V
Output Short-Circuit
Duration to GND . . . . . . . . . . . . . Observe Derating Curves
ESD Susceptibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 V
Storage Temperature Range
S, RU Package . . . . . . . . . . . . . . . . . . . . . Ϫ65°C to +150°C
Operating Temperature Range
OP250G/OP450G . . . . . . . . . . . . . . . . . . Ϫ40°C to +125°C
Junction Temperature Range
S, RU Package . . . . . . . . . . . . . . . . . . . . . Ϫ65°C to +150°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . . +300°C
NOTES
1_{Absolute maximum ratings apply at +25°C, unless otherwise noted.}
2_{Stresses above those listed under Absolute Maximum Ratings may cause perma-}
nent damage to the device. This is a stress rating only; the functional operation of
the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
Package Type
8-Lead SOIC (S)
8-Lead TSSOP (RU)
14-Lead SOIC (N)
14-Lead TSSOP (RU)
␪_JA*
␪_JC
Units
158
43
°C/W
240
43
°C/W
120
36
°C/W
180
35
°C/W
*θ_JA is specified for the worst case conditions, i.e., θ_JA specified for device soldered
in circuit board for surface mount packages.
ORDERING GUIDE
Model
Temperature
Range
Package
Description
Package
Options
OP250GS
OP250GRU
OP450GS
OP450GRU
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
–40°C to +125°C
8-Lead SOIC
8-Lead TSSOP
14-Lead SOIC
14-Lead TSSOP
SO-8
RU-8
N-14
RU-14
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the OP250/OP450 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
–4–
REV. 0