OP113 Datasheet, PDF (4/16 Pages) Analog Devices – Low Noise, Low Drift Single-Supply Operational Amplifiers

OP113/OP213/OP413
ABSOLUTE MAXIMUM RATINGS¹
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . ± 10 V
Output Short-Circuit Duration to GND . . . . . . . . . . Indefinite
Storage Temperature Range
P, S Package . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Operating Temperature Range
OP113/OP213/OP413E, F . . . . . . . . . . . . . . –40°C to +85°C
Junction Temperature Range
P, S Package . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . . +300°C
Package Type
␪_JA2
␪_JC
8-Lead Plastic DIP (P) 103
43
8-Lead SOIC (S)
158
43
14-Lead Plastic DIP (P) 83
39
16-Lead SOIC (S)
92
27
Units
°C/W
°C/W
°C/W
°C/W
NOTES
1_{Absolute maximum ratings apply to both DICE and packaged parts, unless}
otherwise noted.
2_{θJA is specified for the worst case conditions, i.e., θJA is specified for device in socket}
for cerdip, P-DIP, and LCC packages; θJA is specified for device soldered in circuit
board for SOIC package.
Model
OP113EP
OP113ES
OP113FP
OP113FS
OP213EP
OP213ES
OP213FP
OP213FS
OP413EP
OP413ES
OP413FP
OP413FS
ORDERING GUIDE
Temperature
Range
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
Package
Description
Package
Options
8-Lead Plastic DIP
8-Lead SOIC
8-Lead Plastic DIP
8-Lead SOIC
N-8
SO-8
N-8
SO-8
8-Lead Plastic DIP
8-Lead SOIC
8-Lead Plastic DIP
8-Lead SOIC
N-8
SO-8
N-8
SO-8
14-Lead Plastic DIP N-14
16-Lead Wide SOIC R-16
14-Lead Plastic DIP N-14
16-Lead Wide SOIC R-16
–4–
REV. C