ADUM1200_15 Datasheet, PDF (4/28 Pages) Analog Devices – Dual-Channel Digital Isolators

ADuM1200/ADuM1201
Data Sheet
SPECIFICATIONS
ELECTRICAL CHARACTERISTICS—5 V, 105°C OPERATION
All voltages are relative to their respective ground; 4.5 V ≤ VDD1 ≤ 5.5 V, 4.5 V ≤ VDD2 ≤ 5.5 V; all minimum/maximum specifications apply
over the entire recommended operating range, unless otherwise noted; all typical specifications are at TA = 25°C, VDD1 = VDD2 = 5 V; this
does not apply to the ADuM1200W and ADuM1201W automotive grade products.
Table 1.
Parameter
DC SPECIFICATIONS
Input Supply Current per Channel, Quiescent
Output Supply Current per Channel, Quiescent
ADuM1200 Total Supply Current, Two Channels¹
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BR and CR Grades Only)
VDD1 Supply Current
VDD2 Supply Current
25 Mbps (CR Grade Only)
VDD1 Supply Current
VDD2 Supply Current
ADuM1201 Total Supply Current, Two Channels¹
DC to 2 Mbps
VDD1 Supply Current
VDD2 Supply Current
10 Mbps (BR and CR Grades Only)
VDD1 Supply Current
VDD2 Supply Current
25 Mbps (CR Grade Only)
VDD1 Supply Current
VDD2 Supply Current
For All Models
Input Currents
Logic High Input Threshold
Logic Low Input Threshold
Logic High Output Voltages
Logic Low Output Voltages
SWITCHING SPECIFICATIONS
ADuM120xAR
Minimum Pulse Width²
Maximum Data Rate³
Propagation Delay⁴
Pulse Width Distortion, |tPLH − tPHL|⁴
Change vs. Temperature
Propagation Delay Skew⁵
Channel-to-Channel Matching⁶
Output Rise/Fall Time (10% to 90%)
Symbol
IDDI (Q)
IDDO (Q)
Min
IDD1 (Q)
IDD2 (Q)
IDD1 (10)
IDD2 (10)
IDD1 (25)
IDD2 (25)
IDD1 (Q)
IDD2 (Q)
IDD1 (10)
IDD2 (10)
IDD1 (25)
IDD2 (25)
IIA, IIB
VIH
VIL
VOAH, VOBH
VOAL, VOBL
−10
0.7 (VDD1 or VDD2)
(VDD1 or VDD2) − 0.1
(VDD1 or VDD2) − 0.5
PW
1
tPHL, tPLH
50
PWD
tPSK
tPSKCD/tPSKOD
tR/tF
Typ Max
0.50 0.60
0.19 0.25
Unit Test Conditions
mA
mA
1.1
1.4
0.5
0.8
4.3
5.5
1.3
2.0
10
13
2.8
3.4
mA DC to 1 MHz logic signal freq.
mA DC to 1 MHz logic signal freq.
mA 5 MHz logic signal freq.
mA 5 MHz logic signal freq.
mA 12.5 MHz logic signal freq.
mA 12.5 MHz logic signal freq.
0.8
1.1
0.8
1.1
mA DC to 1 MHz logic signal freq.
mA DC to 1 MHz logic signal freq.
2.8
3.5
2.8
3.5
mA 5 MHz logic signal freq.
mA 5 MHz logic signal freq.
6.3
8.0
6.3
8.0
mA 12.5 MHz logic signal freq.
mA 12.5 MHz logic signal freq.
+0.01 +10
μA
V
0.3 (VDD1 or VDD2) V
5.0
V
4.8
V
0.0
0.1
V
0.04 0.1
V
0.2
0.4
V
0 V ≤ VIA, VIB ≤ (VDD1 or VDD2)
IOx = −20 μA, VIx = VIxH
IOx = −4 mA, VIx = VIxH
IOx = 20 μA, VIx = VIxL
IOx = 400 μA, VIx = VIxL
IOx = 4 mA, VIx = VIxL
1000
150
40
11
100
50
10
ns
Mbps
ns
ns
ps/°C
ns
ns
ns
CL = 15 pF, CMOS signal levels
Rev. I | Page 4 of 28