ADM213E_15 Datasheet, PDF (4/20 Pages) Analog Devices – RS-232 Line Drivers/Receivers

ADM206E/ADM207E/ADM208E/ADM211E/ADM213E
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 5.
Parameter
VCC
V+
V–
Input Voltages
TIN
RIN
Output Voltages
TOUT
ROUT
Short-Circuit Duration
TOUT
Power Dissipation
N-24-1 PDIP
(Derate 13.5 mW/°C above 70°C)
RW-24 SOIC_W
(Derate 12 mW/°C above 70°C)
RS-24 SSOP
(Derate 12 mW/°C above 70°C)
RU-24 TSSOP
(Derate 12 mW/°C above 70°C)
RW-28 SOIC_W
(Derate 12 mW/°C above 70°C)
RS-28 SSOP
(Derate 10 mW/°C above 70°C)
RU-28 TSSOP
(Derate 12 mW/°C above 70°C)
Operating Temperature Range
Storage Temperature Range
Lead Temperature, Soldering (10 sec)
ESD Rating
MIL-STD-883B (I/O Pins)
IEC 1000-4-2 Air-Gap (I/O Pins)
IEC 1000-4-2 Contact (I/O Pins)
Rating
−0.3 V to +6 V
(VCC – 0.3 V) to +14 V
+0.3 V to −14 V
−0.3 V to (V+ + 0.3 V)
±30 V
±15 V
−0.3 V to (VCC + 0.3 V)
Continuous
1000 mW
900 mW
850 mW
900 mW
900 mW
900 mW
900 mW
−40°C to +85°C
−65°C to +150°C
300°C
±15 kV
±15 kV
±8 kV
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
Rev. E | Page 4 of 20