ADCMP361 Datasheet, PDF (4/13 Pages) Analog Devices – Single Comparator with 400mV Reference and Dual Polarity Outputs

ADCMP361
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 5.
Parameter
Vs
INx
OUTx
Operating Temperature Range
Storage Temperature Range
θJA Thermal Impedance, SC70
Lead Temperature
Soldering (10 sec)
Vapor Phase (60 sec)
Infrared (15 sec)
Rating
−0.3V to +6V
−0.3V to +6V
−0.3V to +6V
−40°C to +125°C
−65°C to +150°C
146°C/W
300°C
215°C
220°C
Preliminary Technical Data
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. PrB | Page 4 of 13