AD5061_15 Datasheet, PDF (4/20 Pages) Analog Devices – 16-Bit VOUT nanoDAC SPI Interface 2.7 V to 5.5 V, in an SOT-23

AD5061
Parameter
LOGIC INPUTS
Input Current⁵
Input Low Voltage (VIL)
Input High Voltage (VIH)
Pin Capacitance
POWER REQUIREMENTS
VDD
IDD (Normal Mode)
VDD = 2.7 V to 5.5 V
IDD (All Power-Down Modes)
VDD = 2.5 V to 5.5 V
B Grade¹
Min Typ Max
Unit
±1
±5
μA
0.8
V
0.8
2.0
V
1.8
4
pF
2.7
5.5
V
1.0
1.2
mA
0.89
1
μA
0.265
Test Conditions/Comments
VDD = 4.5 V to 5.5 V
VDD = 2.7 V to 3.6 V
VDD = 2.7 V to 5.5 V
VDD = 2.7 V to 3.6 V
All digital inputs at 0 V or VDD
DAC active and excluding load current
VIN = VDD and VIL = GND, VDD = 5.5 V,
VREF = 4.096 V, code = midscale
VIN = VDD and VIL = GND, VDD = 3.0 V,
VREF = 4.096 V, code = midscale
VIH = VDD and VIL = GND, VDD = 5.5 V,
VREF = 4.096 V, code = midscale
VIH = VDD and VIL = GND, VDD = 3.0 V,
VREF = 4.096 V, code = midscale
1 _{Temperature range for B grade: −40°C to +85°C, typical at 25°C; temperature range for Y grade: −40°C to +125°C.}
2 _{Linearity calculated using a reduced code range (160 to 65535).}
3 _{Guaranteed by design and characterization, not production tested.}
4 _{The typical output supply headroom performance for various reference voltages at −40°C can be seen in Figure 27.}
5 _{Total current flowing into all pins.}
Rev. B | Page 4 of 20