AD10200_15 Datasheet, PDF (4/20 Pages) Analog Devices – Dual Channel, 12-Bit 105 MSPS IF Sampling

AD10200
ABSOLUTE MAXIMUM RATINGS^{1, 2}
V_DD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V
V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V
Analog Inputs . . . . . . . . . . . . . . . . . . . . . . . . 5 Vp-p(18 dBm)
Digital Inputs . . . . . . . . . . . . . . . . . . . –0.5 V to V_DD + 0.5 V
Digital Output Current . . . . . . . . . . . . . . . . . . . . . . . . 20 mA
Operating Temperature . . . . . . . . . . . . . . . . –55°C to +125°C
Storage Temperature . . . . . . . . . . . . . . . . . . –65°C to +150°C
Maximum Junction Temperature . . . . . . . . . . . . . . . . . 175°C
Maximum Case Temperature . . . . . . . . . . . . . . . . . . . . 150°C
NOTES
1_{Stresses above those listed under Absolute Maximum Ratings may cause perma-}
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions outside of those indicated in the operation
sections of this specification is not implied. Exposure to absolute maximum ratings
for extended periods may affect device reliability.
2_{Typical thermal impedances for “Z” package:}
θ_JC = 2.22°C/W; θ_JA = 24.3°C/W.
EXPLANATION OF TEST LEVELS
Test Level
I. 100% production tested.
II. 100% production tested at 25°C and sample tested at
specific temperatures.
III. Sample tested only.
IV. Parameter is guaranteed by design and characterization
testing.
V. Parameter is a typical value only.
VI. 100% production tested at 25°C; guaranteed by design and
characterization testing for industrial temperature range.
Table I. Output Coding (VREF = 2.5 V) (Two’s Complement)
Code
+2047
•
•
0
–1
•
•
–2048
A_IN (V)
+1.024
•
•
0
–0.00049
•
•
–1.024
Digital Output
0111 1111 1111
•
•
0000 0000 0000
1111 1111 1111
•
•
1000 0000 0000
Model
AD10200BZ
5962-9961002HXA
5962-9961001HXA
AD10200/PCB
ORDERING GUIDE
Temperature Range
–40°C to +85°C (Case)
–40°C to +85°C (Case)
–55°C to +125°C (Case)
Package Description
68-Lead Ceramic Leaded Chip Carrier
68-Lead Ceramic Leaded Chip Carrier
68-Lead Ceramic Leaded Chip Carrier
Evaluation Board with AD10200BZ
Package Option
Z-68B
Z-68B
Z-68B
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the AD10200 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
–4–
REV. A