7B31_15 Datasheet, PDF (4/8 Pages) Analog Devices – Isolated Voltage Input

7B31-05 to 7B31-08
Power OFF
5 MHz Bandwidth
10 Hz to 100 kHz Bandwidth
0.1 Hz to 10 Hz Bandwidth
Bandwidth, -3 dB
Output Rise Time, 10% to 90% Span
Input-to-Output and Power
Input-to-Output and Power @ 50/60 Hz
Normal Mode Rejection @ 50/60 Hz
Input Protection
Input Transient Protection
Output Resistance
Voltage Output Protection
Voltage Range, Operating
Current
Sensitivity
Mechanical Dimensions
Weight
Temperature Range
Operating
Storage
Relative Humidity, 24 hours
ESD Sensitivity
RFI Susceptibility
1 MΩ
30 kΩ, minimum
Output Noise
6 mV peak
0.4 mV rms
3 µV peak
3 Hz
150 ms
Common-Mode Voltage (CMV)
1500 V rms continuous
Common Mode Rejection (CMR)
120 dB
120 dB
120 V rms, continuous
±35 V dc, continuous
ANSI/IEEE C376.90.1-1989
IEEE-STD 472
IEC 255-4, Class II
<1Ω
Continuous Short to Ground
Power Supply
+14 V dc to +35 V dc
+25 mA, maximum
±0.0001%/% of Vs
1.663" x 2.11" x 0.563"
(42.24 mm x 53.6 mm x 14.3 mm)
60 grams
Environmental
-40°C to +85°C
-40°C to +85°C
0 to 90% @ +60°C non-condensing
IEC 801-2, Level 2
±0.5% Span error @ 400 MHz, 5 Watt, 3 ft
Warm-up time required to meet specifications is approximately 10 minutes.
* Contact factory for OEM requirements.
1_{Includes the combined effects of repeatability, hysteresis, and nonlinearity.}
2_{Nonlinearity is calculated using best-fit straight line method.}
3_{Vz is the nominal input voltage that results in a 0 V output.}
Specifications subject to change without notice.
Rev. 0 | Page 4 of 8
7B31