AD8362_15 Datasheet, PDF (30/32 Pages) Analog Devices – 50 Hz to 3.8 GHz 65 dB TruPwr Detector

AD8362
Data Sheet
Table 6. Bill of Materials
Designator
Description
T1
C1
C2
C3, C9
C4, C7, C10
C5, C6
C8
DUT
LK1
R1, R6, R7, R8, R10, R15
R4, R5
R9, R17
R13
R16
SW1
SW2
SW3
Supply filtering/decoupling capacitor
Supply filtering/decoupling capacitor
Output low-pass filter capacitor
Input bias-point decoupling capacitors
Input signal coupling capacitors
Input high-pass filter capacitor
AD8362
Use to reduce VTGT or to externally apply a voltage to VTGT
Jumpers
Use to reduce VTGT or to externally apply a voltage to VTGT
Slope adjustment resistors (see the Altering the Slope section)
Power-up terminating resistor
Not installed
Use to reduce VTGT or to externally apply a voltage to VTGT
Measurement mode/controller mode selector
Power-down/power-up or external power-down selector
Part Number
ETC 1.6-4-2-3
(M/A-COM)
AD8362ARU
Default Value
0.1 µF
100 pF
C3 = 0.1 µF, C9 = open
1000 pF
100 pF
1000 pF
LK1 = open
0Ω
R4 = 0 Ω, R5 = 10 kΩ
R9 = 10 kΩ, R17 = open
R13 = 10 kΩ
Open
SW1 connects VREF to VTGT
SW2 connects VSET to VOUT
SW3 connects PWDN to R13
Rev. E | Page 30 of 32