UG-802 Datasheet, PDF (3/19 Pages) Analog Devices – EV-ADF5355SD1Z User Guide

EV-ADF5355SD1Z User Guide
GETTING STARTED
SOFTWARE INSTALLATION PROCEDURES
See the ADF5355 product page for the EV-ADF5355SD1Z control
software. For the software installation procedure, see the PLL
Software Installation Guide.
UG-802
EVALUATION BOARD SETUP PROCEDURES
To run the software,
1. Click the ADF5355 file on the desktop or from the Start
menu.
2. On the Select Device and Connection tab, choose ADF5355
and SDP board (black), and then click Connect (see
Figure 2).
3. When connecting the board, allow 5 sec to 10 sec for the
label on the status bar to change.
Under the File menu, the current settings can be saved to, and
loaded from, a text file.
Figure 2. Software Front Panel Display—Select Device and Connection
Rev. B | Page 3 of 19