OP97 Datasheet, PDF (3/12 Pages) Analog Devices – Low-Power, High-Precision Operational Amplifier

OP97
ABSOLUTE MAXIMUM RATINGS¹
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 V
Input Voltage² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 V
Differential Input Voltage³ . . . . . . . . . . . . . . . . . . . . . . ± 1 V
Differential Input Current³ . . . . . . . . . . . . . . . . . . . . ± 10 mA
Output Short-Circuit Duration . . . . . . . . . . . . . . . . Indefinite
Operating Temperature Range
OP97A (Z) . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +125°C
OP97E, F (P, Z, S) . . . . . . . . . . . . . . . . . . –40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Junction Temperature Range . . . . . . . . . . . . –65°C to +150°C
Lead Temperature (Soldering, 60 sec) . . . . . . . . . . . . 300°C
Package Type
␪_JA4
8-Lead Hermetic DIP (Z) 148
8-Lead Plastic DIP (P)
103
8-Lead SO (S)
158
␪_JC
Unit
16
°C/W
43
°C/W
43
°C/W
NOTES
1_{Absolute maximum ratings apply to both DICE and packaged parts, unless}
otherwise noted.
2_{For supply voltages less than ± 20 V, the absolute maximum input voltage is equal}
to the supply voltage.
3_{The OP97’s inputs are protected by back-to-back diodes. Current-limiting resis-}
tors are not used in order to achieve low noise. Differential input voltages greater
than 1 V will cause excessive current to flow through the input protection diodes
unless limiting resistance is used.
4_{θJA is specified for worst case mounting conditions, i.e., θJA is specified for device}
in socket for TO, cerdip, and P-DIP packages; θ_JA is specified for device soldered
to printed circuit board for SO package.
ORDERING GUIDE
Model
Temperature
Range
Package
Option¹
OP97AZ³
OP97ARC/883^{2, 3}
OP97EJ³
OP97EZ³
OP97EP
OP97FZ³
OP97FP
OP97FS
OP97FS-REEL
OP97FS-REEL7
–55°C to +125°C
–55°C to +125°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
8-Lead Cerdip
20-Contact LCC
TO-99
8-Lead Cerdip
8-Lead Plastic DIP
8-Lead Cerdip
8-Lead Plastic DIP
8-Lead SOIC
8-Lead SOIC
8-Lead SOIC
NOTES
1_{For outline information see Package Information section.}
2_{For devices processed in total compliance to MIL-STD-883, add /883 after}
part number. Consult factory for /883 data sheet.
3_{Not for new designs; obsolete April 2002.}
For Military processed devices, please refer to the Standard
Microcircuit Drawing (SMD) available at
www.dscc.dla.mil/programs/milspec/default.asp
SMD Part Number
ADI Equivalent
59628954401PA
59628954401GA*
OP97AZMDA
OP97AJMDA
*Not for new designs; obsolete April 2002.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the OP97 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. D
–3–