OP297_03 Datasheet, PDF (3/12 Pages) Analog Devices – Dual Low Bias Current Precision Operational Amplifier

OP297
ABSOLUTE MAXIMUM RATINGS¹
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 V
Input Voltage² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 20 V
Differential Input Voltage² . . . . . . . . . . . . . . . . . . . . . . . . 40 V
Output Short-Circuit Duration . . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range
Z Package . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +175°C
P, S Packages . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Operating Temperature Range
OP297E (Z) . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
OP297F, OP297G (P, S) . . . . . . . . . . . . . . –40°C to +85°C
Junction Temperature
Z Package . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to +175°C
P, S Packages . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . . . 300°C
Package Types
␪_JA3
8-Lead CERDIP (Z)
134
8-Lead PDIP (P)
96
8-Lead SOIC (S)
150
␪_JC
Unit
12
°C/W
37
°C/W
41
°C/W
NOTES
1 _{Stresses above those listed under Absolute Maximum Ratings may cause perma-}
nent damage to the device. This is a stress rating only; and functional operation
of the device at these or any other conditions above those indicated in the
operational section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
2 _{For supply voltages less than ± 20 V, the absolute maximum input voltage is equal}
to the supply voltage.
3 _{␪JA is specified for worst case mounting conditions, i.e., ␪JA is specified for device}
in socket for CERDIP and PDIP, packages; ␪_JA is specified for device soldered to
printed circuit board for SOIC package.
Model
OP297EZ
OP297FP
OP297FS
OP297FS-REEL
OP297FS-REEL7
OP297GP
OP297GS
OP297GS-REEL
OP297GS-REEL7
ORDERING GUIDE
Temperature Range
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
Package Description
8-Lead CERDIP
8-Lead PDIP
8-Lead SOIC
8-Lead SOIC
8-Lead SOIC
8-Lead PDIP
8-Lead SOIC
8-Lead SOIC
8-Lead SOIC
Package Options
Q-8
N-8
R-8
R-8
R-8
N-8
R-8
R-8
R-8
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
OP297 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended
to avoid performance degradation or loss of functionality.
REV. E
1/2
OP297
V₁ 20Vp-p @ 10Hz
2k⍀
50k⍀
50⍀
1/2
OP297
V₂
) ^{CHANNEL SEPARATION = 20 log}
V₁
V₂ /10000
Figure 3. Channel Separation Test Circuit
–3–