OP275_04 Datasheet, PDF (3/12 Pages) Analog Devices – Dual Bipolar/JFET, Audio Operational Amplifier

ABSOLUTE MAXIMUM RATINGS¹
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±22 V
Input Voltage² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±22 V
Differential Input Voltage² . . . . . . . . . . . . . . . . . . . . . . . ±7.5 V
Output Short-Circuit Duration to GND³ . . . . . . . . . . Indefinite
Storage Temperature Range
P, S Packages . . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Operating Temperature Range
OP275G . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Junction Temperature Range
P, S Packages . . . . . . . . . . . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . . . . .300°C
Package Type
_JA4
_JC
8-Lead Plastic DIP (P) 103
43
8-Lead SOIC (S)
158
43
Unit
°C/W
°C/W
NOTES
1_{Absolute maximum ratings apply to packaged parts, unless otherwise noted.}
2_{For supply voltages greater than ±22V, the absolute maximum input voltage is equal}
to the supply voltage.
3_{Shorts to either supply may destroy the device. See data sheet for full details.}
4_{JA is specified for the worst-case conditions, i.e., JA is specified for device in socket}
for PDIP packages; _JA is specified for device soldered in circuit board for SOIC
packages.
OP275
Model
OP275GP
OP275GS
OP275GS-REEL
OP275GS-REEL7
OP275GSZ*
OP275GSZ-REEL*
OP275GSZ-REEL7*
*Z = Pb-free part.
ORDERING GUIDE
Temperature Range
Package Description
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
8-Lead PDIP
8-Lead SOIC
8-Lead SOIC
8-Lead SOIC
8-Lead SOIC
8-Lead SOIC
8-Lead SOIC
Package Option
N-8
R-8
R-8
R-8
R-8
R-8
R-8
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000V readily accumulate
on the human body and test equipment and can discharge without detection. Although the OP275 features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
REV. C
–3–