ADD8701 Datasheet, PDF (3/8 Pages) Analog Devices – 12-Channel Gamma Buffers with VCOM Buffer

ADD8701
ABSOLUTE MAXIMUM RATINGS*
Supply Voltage (V_DD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
Input Voltage . . . . . . . . . . . . . . . . . . . . . –0.5 V to V_DD + 0.5 V
Storage Temperature Range . . . . . . . . . . . . . –65°C to +150°C
Operating Temperature Range . . . . . . . . . . . . –40°C to +85°C
Junction Temperature Range . . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . . . 300°C
ESD Tolerance (HBM) . . . . . . . . . . . . . . . . . . . . . . . ±1,000 V
*Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
PIN CONFIGURATION
V_DD 1
VCOM IN 2
IN12 3
IN11 4
IN10 5
IN9 6
IN8 7
IN7 8
PIN 1
INDICATOR
ADD8701
TOP VIEW
24 GND
23 V_DD
22 V6
21 V5
20 V4
19 V3
18 V2
17 V1
Package Type
32-Lead LFCSP (CP)
␪_JA1
⌿_JB2
Unit
35
13
°C/W
NOTES
1_{θJA is specified for worst-case conditions, i.e., θJA is specified for device soldered}
in circuit board for surface-mount packages.
2_{ψJB is applied for calculating the junction temperature by reference to the board}
temperature.
ORDERING GUIDE
Model
Temperature Package
Range
Description
Package
Option
ADD8701ACP –40°C to +85°C 32-Lead LFCSP CP-32
PIN FUNCTION DESCRIPTION
Pin No.
1, 15, 23
2
3–14
16, 24, 31
17–22, 25–30
32
Mnemonic
V_DD
VCOM IN
IN12–IN1
GND
V1–V12
VCOM OUT
Description
Power (+)
VCOM Buffer Input
Gamma Buffer Inputs
Power (–)
Gamma Buffer Outputs
VCOM Buffer Output
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
ADD8701 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended
to avoid performance degradation or loss of functionality.
REV. 0
–3–