AD9856 Datasheet, PDF (3/32 Pages) Analog Devices – CMOS 200 MHz Quadrature Digital Upconverter

Parameter
Temp
Test
Level
CMOS LOGIC OUTPUTS (1 mA LOAD)
Logic “1” Voltage
Logic “0” Voltage
+25°C
I
+25°C
I
POWER SUPPLY
+V_S Current
Full Operating Conditions²
Burst Operation (25%)
Single Tone Mode
160 MHz Clock
120 MHz Clock
Power-Down Mode
+25°C
I
+25°C
I
+25°C
I
+25°C
I
+25°C
I
+25°C
I
NOTES
1_{For 200 MHz operation in Modulation Mode at +85 °C operating temperature, V S must be +3 V min.}
2_{Assuming 1.3 kΩ and 0.01 µF loop filter components.}
Specifications subject to change without notice.
AD9856
Min Typ
2.7
AD9856
Max Units
mA
0.4
mA
530 mA
450 mA
495 mA
445 mA
345 mA
2
mA
ABSOLUTE MAXIMUM RATINGS*
Maximum Junction Temperature . . . . . . . . . . . . . . . .+165°C
Storage Temperature . . . . . . . . . . . . . . . . . . –65°C to +150°C
V_S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +4 V
Operating Temperature . . . . . . . . . . . . . . . . . –40°C to +85°C
Digital Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . –0.7 V to +V_S
Lead Temperature (Soldering 10 sec) . . . . . . . . . . . . .+300°C
Digital Output Current . . . . . . . . . . . . . . . . . . . . . . . . . 5 mA
θ_JA Thermal Impedance . . . . . . . . . . . . . . . . . . . . . . . 38°C/W
*Absolute maximum ratings are limiting values, to be applied individually, and
beyond which the serviceability of the circuit may be impaired. Functional
operability under any of these conditions is not necessarily implied. Exposure of
absolute maximum rating conditions for extended periods of time may affect
device reliability.
EXPLANATION OF TEST LEVELS
Test Level
I–
III –
IV –
V–
VI –
100% Production Tested.
Sample Tested Only.
Parameter is guaranteed by design and characterization
testing.
Parameter is a typical value only.
Devices are 100% production tested at +25°C and
guaranteed by design and characterization testing for
industrial operating temperature range.
ORDERING GUIDE
Model
Temperature Package
Range
Description
Package
Option
AD9856AST –40°C to +85°C Thin Quad Flatpack ST-48
AD9856/PCB +25°C
Evaluation Board
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD9856 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. B
–3–