|
AD7939_15 Datasheet, PDF (3/36 Pages) Analog Devices – 8-Channel, 1.5 MSPS, 12-Bit and 10-Bit Parallel ADCs with a Sequencer | |||
|
◁ |
Data Sheet
AD7938/AD7939
SPECIFICATIONS
AD7938 SPECIFICATIONS
VDD = VDRIVE = 2.7 V to 5.25 V, internal/external VREF = 2.5 V, unless otherwise noted, fCLKIN= 25.5 MHz, fSAMPLE = 1.5 MSPS;
TA = TMIN to TMAX, unless otherwise noted.
Table 2.
Parameter
DYNAMIC PERFORMANCE
Signal-to-Noise and Distortion (SINAD)2
Signal-to-Noise Ratio (SNR)2
Total Harmonic Distortion (THD)2
Peak Harmonic or Spurious Noise (SFDR)2
Intermodulation Distortion (IMD)2
Second-Order Terms
Third-Order Terms
Channel-to-Channel Isolation
Aperture Delay2
Aperture Jitter2
Full Power Bandwidth2
DC ACCURACY
Resolution
Integral Nonlinearity2
Differential Nonlinearity2
Differential Mode
Single-Ended Mode
Single-Ended and Pseudo Differential Input
Offset Error2
Offset Error Match2
Gain Error2
Gain Error Match2
Fully Differential Input
Positive Gain Error2
Positive Gain Error Match2
Zero-Code Error2
Zero-Code Error Match2
Negative Gain Error2
Negative Gain Error Match2
ANALOG INPUT
Single-Ended Input Range
Pseudo Differential Input Range
VIN+
VINâ
Fully Differential Input Range
VIN+ and VINâ
VIN+ and VINâ
DC Leakage Current4
Input Capacitance
Value1
69
67
71
69
â73
â69.5
â72
Unit
dB min
dB min
dB min
dB min
dB max
dB max
dB max
â6
dB typ
â90
dB typ
â85
dB typ
5
ns typ
72
ps typ
50
MHz typ
10
MHz typ
12
Bits
±1
LSB max
±1.5
LSB max
±0.95
â0.95/+1.5
±12
±3
±3
±2
LSB max
LSB max
LSB max
LSB max
LSB max
LSB max
±3
LSB max
±1.5
LSB typ
±9.5
LSB max
±1
LSB typ
±3
LSB max
±1.5
LSB typ
0 to VREF
V
0 to 2 Ã VREF
V
0 to VREF
0 to 2 Ã VREF
â0.3 to +0.7
â0.3 to +1.8
V
V
V typ
V typ
VCM ± VREF/2
VCM ± VREF
±1
45
10
V
V
µA max
pF typ
pF typ
Rev. C | Page 3 of 36
Test Conditions/Comments
fIN = 50 kHz sine wave
Differential mode
Single-ended mode
Differential mode
Single-ended mode
â85 dB typ, differential mode
â80 dB typ, single-ended mode
â82 dB typ
fa = 30 kHz, fb = 50 kHz
fIN = 50 kHz, fNOISE = 300 kHz
@ 3 dB
@ 0.1 dB
Differential mode
Single-ended mode
Guaranteed no missed codes to 12 bits
Guaranteed no missed codes to 12 bits
Straight binary output coding
Twos complement output coding
RANGE bit = 0
RANGE bit = 1
RANGE bit = 0
RANGE bit = 1
VDD = 3 V
VDD = 5 V
VCM = common-mode voltage3 = VREF/2
VCM = VREF, VIN+ or VINâ must remain within GND/VDD
When in track
When in hold
|
▷ |