AD7933_15 Datasheet, PDF (3/32 Pages) Analog Devices – 4-Channel, 1.5 MSPS, 10-Bit and 12-Bit Parallel ADCs with a Sequencer

AD7933/AD7934
SPECIFICATIONS
AD7933 SPECIFICATIONS
VDD = VDRIVE = 2.7 V to 5.25 V, internal/external VREF = 2.5 V, unless otherwise noted. fCLKIN = 25.5 MHz, fSAMPLE = 1.5 MSPS; TA = TMIN to
TMAX1, unless otherwise noted.
Table 2.
Parameter
DYNAMIC PERFORMANCE
Signal-to-Noise + Distortion (SINAD)²
Total Harmonic Distortion (THD)²
Peak Harmonic or Spurious Noise (SFDR)²
Intermodulation Distortion (IMD)²
Second-Order Terms
Third-Order Terms
Channel-to-Channel Isolation
Aperture Delay²
Aperture Jitter²
Full Power Bandwidth²
DC ACCURACY
Resolution
Integral Nonlinearity²
Differential Nonlinearity²
Single-Ended and Pseudo Differential
Input
Offset Error²
Offset Error Match²
Gain Error²
Gain Error Match²
Fully Differential Input
Positive Gain Error²
Positive Gain Error Match²
Zero-Code Error²
Zero-Code Error Match²
Negative Gain Error²
Negative Gain Error Match²
ANALOG INPUT
Single-Ended Input Range
Pseudo Differential Input Range
VIN+
VIN−
Fully Differential Input Range³
VIN+ and VIN−
VIN+ and VIN−
DC Leakage Current⁴
Input Capacitance
Value¹
61
60
−70
−72
−86
−90
−75
5
72
50
10
10
±0.5
±0.5
±2
±0.5
±1.5
±0.5
±1.5
±0.5
±2
±0.5
±1.5
±0.5
0 to VREF
0 to 2 × VREF
0 to VREF
0 to 2 × VREF
−0.3 to +0.7
−0.3 to +1.8
VCM ± VREF/2
VCM ± VREF
±1
45
10
Unit
dB min
dB min
dB max
dB max
dB typ
dB typ
dB typ
ns typ
ps typ
MHz typ
MHz typ
Bits
LSB max
LSB max
LSB max
LSB max
LSB max
LSB max
LSB max
LSB max
LSB max
LSB max
LSB max
LSB max
V
V
V
V
V typ
V typ
V
V
μA max
pF typ
pF typ
Test Conditions/Comments
fIN = 50 kHz sine wave
Differential mode
Single-ended mode
fa = 30 kHz, fb = 50 kHz
fIN= 50 kHz, fNOISE = 300 kHz
@ 3 dB
@ 0.1 dB
Guaranteed no missed codes to 10 bits
Straight binary output coding
Twos complement output coding
RANGE bit = 0
RANGE bit = 1
RANGE bit = 0
RANGE bit = 1
VDD = 3 V
VDD = 5 V
VCM = VREF/2, RANGE bit = 0
VCM = VREF, RANGE bit = 1
When in track
When in hold
Rev. B | Page 3 of 32