English
Language : 

AD725 Datasheet, PDF (3/20 Pages) Analog Devices – Low Cost RGB to NTSC/PAL Encoder with Luma Trap Port
ABSOLUTE MAXIMUM RATINGS*
Supply Voltage, APOS to AGND . . . . . . . . . . . . . . . . . . +6 V
Supply Voltage, DPOS to DGND . . . . . . . . . . . . . . . . . . +6 V
AGND to DGND . . . . . . . . . . . . . . . . . . . . . –0.3 V to +0.3 V
Inputs . . . . . . . . . . . . . . . . . . . DGND – 0.3 to DPOS + 0.3 V
Internal Power Dissipation . . . . . . . . . . . . . . . . . . . . . . 800 mW
Operating Temperature Range . . . . . . . . . . . . –40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . . –65°C to +125°C
Lead Temperature Range (Soldering 30 sec) . . . . . . . . +230°C
*Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
Thermal Characteristics: 16-Pin SOIC Package: θJA = 100°C/W.
ORDERING GUIDE
Model
Temperature
Range
AD725AR
–40°C to +85°C
AD725AR-Reel –40°C to +85°C
AD725AR-Reel7 –40°C to +85°C
AD725-EB
Package
Description
16-Lead SOIC
16-Lead SOIC
16-Lead SOIC
Evaluation Board
Package
Option
R-16
R-16
R-16
AD725
PIN CONFIGURATION
16-Lead Wide Body (SOIC)
(R-16)
STND 1
16 HSYNC
AGND 2
15 VSYNC
4FSC 3
14 DPOS
APOS 4 AD725 13 DGND
TOP VIEW
CE 5 (Not to Scale) 12 YTRAP
RIN 6
11 LUMA
GIN 7
10 COMP
BIN 8
9 CRMA
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD725 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. 0
–3–