AD713 Datasheet, PDF (3/14 Pages) Analog Devices – Quad Precision, Low Cost, High Speed, BiFET Op Amp

AD713
ABSOLUTE MAXIMUM RATINGS^{1, 2}
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Internal Power Dissipation²
Input Voltage³ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Output Short-Circuit Duration
(For One Amplifier) . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
Differential Input Voltage . . . . . . . . . . . . . . . . . . +V_S and –V_S
Storage Temperature Range (Q) . . . . . . . . . . –65°C to +150°C
Storage Temperature Range (N, R) . . . . . . . . –65°C to +125°C
Operating Temperature Range
AD713J/K . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
AD713A/B . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
AD713S/T . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +125°C
Lead Temperature Range (Soldering 60 sec) . . . . . . . . . . 300°C
NOTES
1_{Stresses above those listed under “Absolute Maximum Ratings” may cause perma-}
nent damage to the device. This is a stress rating only and functional operation of
the device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2_{Thermal Characteristics:}
14-Pin Plastic Package:
θ_JC = 30°C/Watt; θ_JA = 100°C/Watt
14-Pin Cerdip Package:
θ_JC = 30°C/Watt; θ_JA = 110°C/Watt
16-Pin SOIC Package:
θ_JC = 30°C/
Watt; θ_JA = 100°C/Watt
3_{For supply voltages less than ± 18 V, the absolute maximum input voltage is equal}
to the supply voltage.
ORDERING GUIDE
Model
Temperature
Range
Package
Description
Package
Option¹
AD713AQ
AD713BQ
AD713JN
AD713JR-16
AD713JR-16-REEL
AD713JR-16-REEL7
AD713KN
AD713SQ²
AD713TQ²
5962-9063301MCA
5962-9063302MCA²
–40°C to +85°C
–40°C to +85°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
–55°C to +125°C
–55°C to +125°C
–55°C to +125°C
–55°C to +125°C
14-Pin Ceramic DIP
14-Pin Ceramic DIP
14-Pin Plastic DIP
16-Pin Plastic SOIC
16-Pin Plastic SOIC
16-Pin Plastic SOIC
14-Pin Plastic DIP
14-Pin Ceramic DIP
14-Pin Ceramic DIP
14-Pin Ceramic DIP
14-Pin Ceramic DIP
Q-14
Q-14
N-14
R-16
R-16
R-16
N-14
Q-14
Q-14
Q-14
Q-14
1_{N = Plastic DIP; Q = Cerdip; R = Small Outline IC (SOIC).}
2_{Not for new designs. Obsolete April 2002.}
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the AD713 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions are
recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. C
–3–