5962-9201301MEA Datasheet, PDF (3/8 Pages) Analog Devices – Four-Channel Sample-and-Hold Amplifier

ABSOLUTE MAXIMUM RATINGS*
Spec
With
Respect to Min
Max
Unit
V_CC
V_EE
Control Inputs
Analog Inputs
Output Short Circuit to
Ground, V_CC or V_EE
Max Junction
Temperature
Storage
Lead Temperature
(10 sec max)
Power Dissipation
Common
Common
Common
Common
–0.3 +15 V
–15 +0.3 V
–0.5 +7 V
–12 +12 V
Indefinite
+175 °C
–65 +150 °C
+300 °C
640 mW
*Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in the
operational section of this specification is not implied.
AD684
PIN CONFIGURATION
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD684 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
Model¹
ORDERING GUIDE
Package
Temperature Range Option²
AD684JQ
AD684AQ
AD684SQ
0 to +70°C
–40°C to +85°C
–55°C to +125°C
Q-16
Q-16
Q-16
NOTES
1_{For details on grade and package offerings screened in accordance}
with MIL-STD-883, refer to the Analog Devices Military Prod-
ucts Databook or current AD684/883B data sheet.
2_{Q = Cerdip.}
REV. A
–3–