AD7225LNZ Datasheet, PDF (22/24 Pages) Analog Devices – LC2MOS Quad 8-Bit DAC with Separate Reference Inputs

AD7225
0.048 (1.22)
0.042 (1.07)
0.048 (1.22)
0.042 (1.07)
4
26
5
25
PIN 1
IDENTIFIER
TOP VIEW
(PINS DOWN)
11
12
19
18
0.456 (11.582) _SQ
0.450 (11.430)
0.495 (12.57)
0.485 (12.32) ^SQ
0.056 (1.42)
0.042 (1.07)
0.180 (4.57)
0.165 (4.19)
0.020 (0.51)
MIN
0.050
(1.27)
BSC
0.120 (3.04)
0.090 (2.29)
0.021 (0.53)
0.013 (0.33)
0.430 (10.92)
0.390 (9.91)
0.032 (0.81)
0.026 (0.66)
0.045 (1.14) _R
0.025 (0.64)
COMPLIANT TO JEDEC STANDARDS MO-047-AB
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 32. 28-Lead Plastic Leaded Chip Carrier [PLCC]
(P-28)
Dimensions shown in inches and (millimeters)
BOTTOM
VIEW
(PINS UP)
15.60 (0.6142)
15.20 (0.5984)
24
13
7.60 (0.2992)
7.40 (0.2913)
1
12
10.65 (0.4193)
10.00 (0.3937)
0.30 (0.0118)
0.10 (0.0039)
COPLANARITY
0.10
1.27 (0.0500) 0.51 (0.0201)
BSC
0.31 (0.0122)
2.65 (0.1043)
2.35 (0.0925)
8°
0°
SEATING
PLANE
0.33 (0.0130)
0.20 (0.0079)
0.75
0.25
(0.0295)
(0.0098)
⋅
45°
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-013-AD
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 33. 24-Lead Standard Small Outline Package [SOIC_W]
Wide Body
(RW-24)
Dimensions shown in millimeters and (inches)
Rev. C | Page 22 of 24