CJ2M-CPU35_1007 Datasheet, PDF (20/30 Pages) Omron Electronics LLC – SYSMAC CJ-series CJ2M CPU Units, Pulse I/O Modules

Unit Versions
CJ2M-CPU3@/-CPU1@/-MD21@
Units
CJ2M CPU Units
Models
CJ2M-CPU3@
CJ2M-CPU1@
Unit version
CPU: Unit version 1.0 (Built-in EtherNet/IP section: Unit version 2.0)
CPU: Unit version 2.0 (Built-in EtherNet/IP section: Unit version 2.0)
CPU: Unit version 1.0
CPU: Unit version 2.0
Function Support by Unit Version
Functions Supported for Unit Version 2.0 or Later
The following tables show the relationship between unit versions and CX-Programmer versions.
CPU Unit
CJ2M CPU Unit
Model
CJ2M-CPU@@
Function
Unit Version _{Unit version 2.0 or higher}
Unit version 1.0
OK
−
* A Pulse I/O Module must be mounted for CJ2M CPU Units with unit version 2.0 or later.
Unit Versions and Programming Devices
The following tables show the relationship between unit versions and CX-Programmer versions.
Unit Versions and Programming Devices
Required Programming Device
CPU Unit
Functions
Ver. 9.0 or lower
CX-Programmer
Ver. 9.1 or higher
Ver. 9.12 or higher
Programming
Console
CJ2M-CPU@@
Unit version 1.0
Functions for unit version 1.0
−
OK *1
OK
CJ2M-CPU@@
Unit version 2.0
Functions
added for unit
version 2.0
Using new functions
Not using new
functions
−
−
−
OK *2
OK
− *3
OK
*1. CX-Programmer version 9.1 or higher is required to use CJ2M CPU Units.
*2. It is not necessary to upgrade the version of the CX-Programmer if functionality that was enhanced for the upgrade of the CPU Unit will not be
used.
*3. A Programming Console cannot be used with a CJ2M CPU Unit.
Device Type Setting
The unit version does not affect the setting made for the device type on the CX-Programmer. Select the device type as shown in the following table
regardless of the unit version of the CPU Unit.
Series
CJ Series
CPU Unit group
CJ2M CPU Units
CPU Unit model
CJ2M-CPU3@
CJ2M-CPU1@
Device type setting on
CX-Programmer Ver. 9.1 or higher
CJ2M
20