OP37 Datasheet, PDF (2/16 Pages) Analog Devices – Low Noise, Precision, High Speed Operational Amplifier

OP37
ABSOLUTE MAXIMUM RATINGS⁴
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V
Internal Voltage (Note 1 ) . . . . . . . . . . . . . . . . . . . . . . . . . 22 V
Output Short-Circuit Duration . . . . . . . . . . . . . . . . . Indefinite
Differential Input Voltage (Note2) . . . . . . . . . . . . . . . . . 0.7 V
Differential Input Current (Note 2) . . . . . . . . . . . . . . . . 25 mA
Storage Temperature Range . . . . . . . . . . . . . –65°C to +150°C
Operating Temperature Range
OP37A . . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +1 25°C
OP37E (Z) . . . . . . . . . . . . . . . . . . . . . . . . . . –25°C to +85°C
OP37E, OP-37F (P) . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
OP37G (P, S, Z) . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
Lead Temperature Range (Soldering, 60 sec) . . . . . . . . 300°C
Junction Temperature . . . . . . . . . . . . . . . . . . –45°C to +150°C
Package Type
␪_JA3 ␪_JC Unit
8-Lead Hermetic DIP (Z) 148 16
8-Lead Plastic DIP (P) 103 43
8-Lead SO (S)
158 43
°C/W
°C/W
°C/W
NOTES
1_{For supply voltages less than 22 V, the absolute maximum input voltage is equal}
to the supply voltage.
2_{The OP37’s inputs are protected by back-to-back diodes. Current limiting resistors}
are not used in order to achieve low noise. If differential input voltage exceeds 0.7 V,
the input Current should be limited to 25 mA.
3_{␪JA is specified for worst case mounting conditions, i.e., ␪JA is specified for device}
in socket for TO, CerDIP, P-DIP, and LCC packages; ␪_JA is specified for device
soldered to printed circuit board for SO package.
4_{Absolute maximum ratings apply to both DICE and packaged parts, unless}
otherwise noted.
ORDERING GUIDE
T_A = 25°C
V_OS MAX
(µV)
CerDIP
8-Lead
Plastic
8-Lead
25
OP37AZ*
25
OP37EZ
OP37EP
60
OP37FP*
100
OP37GP
100
OP37GZ
OP37GS
*Not for new design, obsolete, April 2002.
Operating
Temperature
Range
MIL
IND/COM
IND/COM
XIND
XIND
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although
the OP37 features proprietary ESD protection circuitry, permanent damage may occur on
devices subjected to high-energy electrostatic discharges. Therefore, proper ESD precautions
are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
–2–
REV. A