OP27S_DIE Datasheet, PDF (2/6 Pages) Analog Devices – This specification documents

Supply Voltage (V_S) ................................................................. ±22V
Input Voltage 2/ ......................................................................... ±22V
Output Short Circuit Duration .................................................... Indefinite
Differential Input Voltage 3/ ........................................................ ±0.7V
Differential Input Current 3/ ........................................................ ±25mA
Storage Temperature Range ................................................... -65C to +150C
Operating Temperature Range ................................................... -55C to +125C
Junction Temperature (T_J)………………………………..………... 150°C
Absolute Maximum Ratings Notes
1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability.
2/ For supply voltages less than ±22V, the absolute maximum input voltage is equal to the supply voltages.
3/ The device inputs are protected by back-to-back diodes. Current limiting resistors are not used in order to achieve low
noise. If differential input voltage exceeds ±0.7V, the input current should be limited to 25mA.
In accordance with class-K version of MIL-PRF-38534, Appendix C, Table C-II,
except as modified herein.
(a) Qual Sample Size and Qual Acceptance Criteria – 10/0
(b) Qual Sample Package – DIP
(c) Pre-screen electrical test over temperature performed post-assembly prior to die qualification.