ADSP-2165_15 Datasheet, PDF (18/39 Pages) Analog Devices – DSP Microcomputers with ROM

ADSP-216x
SPECIFICATIONS
ADSP-2162/ADSP-2164/ADSP-2166–SUPPLY CURRENT AND POWER
Parameter
Test Conditions
Min
I_DD Supply Current (Dynamic)¹
I_DD
Supply Current (Idle)^{1, 3}
@ V_DD = max, t_CK = 60 ns²
@ V_DD = max, t_CK = 76.9 ns
@ V_DD = max, t_CK = 97.6 ns
@ V_DD = max, t_CK = 60 ns
@ V_DD = max, t_CK = 76.9 ns
@ V_DD = max, t_CK = 97.6 ns
NOTES
1_{Current reflects device operating with no output loads.}
2_{VIN = 0.4 V and 2.4 V.}
3_{Idle refers to ADSP-216x state of operation during execution of IDLE instruction. Deasserted pins are driven to either VDD or GND.}
For typical supply current (internal power dissipation) figures, see Figure 15.
Specifications subject to change without notice.
Max
16
15
14
5
4
4
IDD DYNAMIC^1,2
50
48mW
45
V_DD = 3.6V
40
V_DD = 3.30V
37mW
35
30
29mW
25 24mW
20 _19mW
15 _15mW
V_DD = 3.0V
10
5
0
5.00
7.00
10.00 13.83
FREQUENCY – MHz
15.00
IDD IDLE¹
14
13mW
12
V_DD = 3.6V
10
9mW
8
10mW
V_DD = 3.30V
8mW
6 6mW
5mW
4
V_DD = 3.0V
IDD IDLE n MODES³
14
12
IDD IDLE
13mW
10
9mW
8
IDLE 16
7mW
6
5mW
4 4mW
IDLE 128
6mW
2
2
0
5.00
7.00
10.00
13.83
FREQUENCY – MHz
15.00
0
5.00
7.00
10.00
13.83
FREQUENCY – MHz
15.00
VALID FOR ALL TEMPERATURE GRADES.
1_{POWER REFLECTS DEVICE OPERATING WITH NO OUTPUT LOADS.}
2_{IDLE REFERS TO ADSP-216x OPERATION DURING EXECUTION OF IDLE INSTRUCTION.}
DEASSERTED PINS ARE DRIVEN TO EITHER V_DD OR GND.
3_{MAXIMUM POWER DISSIPATION AT VDD = 3.6V DURING EXECUTION OF IDLE n INSTRUCTION.}
Figure 15. ADSP-2162 Power (Typical) vs. Frequency)
Unit
mA
mA
mA
mA
mA
mA
–18–
REV. 0