OP470AY Datasheet, PDF (15/16 Pages) Analog Devices – Very Low Noise Quad Operational Amplifier

OP470
OUTLINE DIMENSIONS
14-Lead Ceramic Dip-Glass Hermetic Seal [CERDIP]
(Q-14)
Dimensions shown in inches and (millimeters)
14-Lead Plastic Dual-in-Line Package [PDIP]
(N-14)
Dimensions shown in inches and (millimeters)
0.005 (0.13) MIN 0.098 (2.49) MAX
14
PIN 1
1
8
0.310 (7.87)
7
0.220 (5.59)
0.100 (2.54) BSC
0.320 (8.13)
0.290 (7.37)
0.785 (19.94) MAX 0.060 (1.52)
0.200 (5.08)
0.015 (0.38)
MAX
0.200 (5.08)
0.125 (3.18)
0.023 (0.58)
0.014 (0.36)
0.150
(3.81)
MIN
0.070 (1.78)
0.030 (0.76)
SEATING
PLANE
15
0
0.015 (0.38)
0.008 (0.20)
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
0.685 (17.40)
0.665 (16.89)
0.645 (16.38)
14
8
1
7
0.295 (7.49)
0.285 (7.24)
0.275 (6.99)
0.180 (4.57)
MAX
0.150 (3.81)
0.130 (3.30)
0.110 (2.79)
0.100 (2.54)
BSC
0.015 (0.38)
MIN
0.022 (0.56) 0.060 (1.52)
0.018 (0.46) 0.050 (1.27)
0.014 (0.36) 0.045 (1.14)
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
0.150 (3.81)
0.135 (3.43)
0.120 (3.05)
SEATING
PLANE
0.015 (0.38)
0.010 (0.25)
0.008 (0.20)
COMPLIANT TO JEDEC STANDARDS MO-095-AB
CONTROLLING DIMENSIONS ARE IN INCH; MILLIMETERS DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
16-Lead Standard Small Outline Package [SOIC]
Wide Body
(RW-16)
Dimensions shown in millimeters and (inches)
10.50 (0.4134)
10.10 (0.3976)
16
9
7.60 (0.2992)
7.40 (0.2913)
10.65 (0.4193)
1
8
10.00 (0.3937)
0.30 (0.0118)
0.10 (0.0039)
1.27 (0.0500) ^{2.65 (0.1043)}
BSC
2.35 (0.0925)
0.75 (0.0295)
0.25 (0.0098)^{؋ 45؇}
COPLANARITY
0.10
0.51 (0.0201)
0.33 (0.0130)
SEATING
PLANE
8؇
0.32 (0.0126) ^0؇
0.23 (0.0091)
1.27 (0.0500)
0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-013AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
REV. B
–15–