EVAL-ADM1030 Datasheet, PDF (13/14 Pages) Analog Devices – Evaluation Board for ACPI Temperature Monitor and PWM Fan Controller

Preliminary Technical Data
EVAL-ADM1030/31
SAVING TO FILE
This window allows the user to save all the ADM1030/31
data to an Microsoft™ Excel File. The following data is
saved
1.Local Temperature
2.Remote Temperature, channel 1
3.Fan Speed, channel 1, in RPM
4.Channel 1, PWM Duty Cycle
5.Remote Temperature, channel 2
6.Fan Speed, channel 2, in RPM
7.Channel 2, PWM Duty Cycle
To begin saving this data to an Excel file first click on
“Make New Log”. A Windows “Open File” window
Y _{should open. Choose a name for the log and then click}
R “Open”. The software will then begin saving the above
values to the Excel file. The user can also control how often
A _{these values are stored to the Excel file by changing the}
IN value written in the “Delay(Sec)” window. This value
L _{represents the time in seconds between successive saves. To}
IM ^A stop saving to the Excel file the user should click on the
EL ^{IC “Logging to file” button.}
SAVE/RECALL
PR ^{HN This window allows the user to save all the current values in}
C ^{A the device to a .txt file. Click on “Save Register Values”.}
E ^{T This causes the Register Contents Window to be displayed.}
Click on “Set File Path” command. The Windows “Open”
T _{DA Window is then displayed. Choose a filename and Click}
“Open”. Then Click on “Save” in the “Register Contents
Window”. This allows a register dump for easy writing of
BIOS Software.
This window also allows the user to program all the
registers with a previously saved set of values. This is
achieved using the “Recall Previous Setup” Command.
Click on “Recall Previous Setup” and choose the .txt
filename of a previous set of register values. Then Click on
“Open”. These previous values are written to the registers.
REV. PrA
–13–