AD9211_07 Datasheet, PDF (12/28 Pages) Analog Devices – 10-Bit, 200 MSPS/250 MSPS/300 MSPS, 1.8 V Analog-to-Digital Converter

AD9211
Pin No.
9
10
11 to 20, 51, 52
21
22
Mnemonic
OR−
OR+
DNC
DNC/(OR−)
DNC/(OR+)
Description
D6 Complement Output Bit. (This pin is disabled if Pin 21 is reconfigured through the SPI to be OR−.)
D6 True Output Bit. (This pin is disabled if Pin 22 is reconfigured through the SPI to be OR+.)
Do Not Connect.
Do Not Connect. (This pin can be reconfigured as the Overrange Complement Output Bit through
the serial port register.)
Do Not Connect. (This pin can be reconfigured as the Overrange True Output Bit through the serial
port register.)
1 _{AGND and DRGND should be tied to a common quiet ground plane.}
Rev. 0 | Page 12 of 28