UG-532 Datasheet, PDF (10/12 Pages) Analog Devices – Full-featured evaluation board

UG-532
Evaluation Board User Guide
ORDERING INFORMATION
COMPONENTS LIST
Table 4.
Qty Reference Designator
8 C1, C3, C5, C7, C8, C9, C16, C20
10 C2, C4, C6, C10 to C12, C15,
C21 to C23
8 C13, C17 to C19, C24 to C27
1 C14
3 J1, J2, J3
1 J4
1 J5
1 L1
4 LK1, LK4, LK5, LK6
1 LK2
1 LK3
1 R1
1 R2
1 R3
2 R4, R11
11 R5 to R7, R10, R12 to R16, R19, R22
2 R8 to R9
4 R17 to R18, R20 to R21
2 R23, R24
9 TP1 to TP9
1 U1
1 U2
1 U3
1 U4
1 U5
1 U6
1 U7
9 EXT_REF, VOUTA1, VOUTA2,
VOUTB1, VOUTB2, VOUTC1,
VOUTC2, VOUTD1, VOUTD2
Description
10 µF, 10 V capacitor, Case A
100 nF, 50 V capacitor, 0603
N/A
1 µF, 10 V capacitor, 0603,
2-pin terminal block (5 mm pitch)
120-way female connector, 0.6mm pitch
10-pin (2 × 5) 0.1" pitch SMT header
Ferrite bead
Jumper block using 3-pin SIP header
6-pin (3 × 2) 0.1" header and shorting block
8-pin (4 × 2) 0.1" header and shorting block
300 kΩ resistor, 0603
1 MΩ resistor, 0603
1.5 Ω resistor, 0603
0 Ω resistor, 0805
N/A
10 kΩ resistor, 0603
10 kΩ resistor, 0603
2.2 kΩ resistor, 0603
Red test point
Adjustable LDO regulator
32K I²C serial EEPROM
+5 V voltage regulator
Voltage reference
Quad, 16-/16-Bit nanoDAC+ with I²C
interface
Voltage reference
Quad, 16-/16-bit nanoDAC+ with 2 ppm/°C
on-chip reference and I²C interface
Straight PCB mount SMB jack–50 Ω
Supplier/Part Number
FEC 197-130
FEC 8820023
Not inserted
FEC 318-8840
FEC 151789
FEC 1324660 or Digi-Key H1219-ND
FEC 1022244 (36-pin strip)
Digi-Key 490-1024-1-ND
FEC 1022248 and 150410
FEC 148-535 and 150-411 (36-pin strip)
FEC 1022244 and 150-411 (36-pin strip)
Digi-Key 541-300KHCT-ND
Digi-Key RMCF1/161MFRCT-ND
FEC 9331832
FEC 9333681
Not inserted
FEC 933-0399
FEC 933-0402
FEC 157 7611
FEC 8731144 (pack)
Analog Devices ADP3331ARTZ
FEC 1331330
Analog Devices ADP3367ARZ
Analog Devices ADR431ARZ
Analog Devices AD5694BRUZ/AD5696BRUZ
Analog Devices ADR435ARZ
Analog Devices AD5694RBRUZ/
AD5696RBRUZ
FEC 1206013
Rev. 0 | Page 10 of 12