UG-459 Datasheet, PDF (10/12 Pages) Analog Devices – Full-featured evaluation board

UG-459
Evaluation Board User Guide
ORDERING INFORMATION
COMPONENTS LIST
Table 4.
Qty Reference Designator
1 U7
1 U5
1 U1
1 U3
1 U6
1 U4
8 VOUTA,VOUTA1, VOUTB, VOUTB2,
VOUTC, VOUTC1, VOUTD, VOUTD1
1 L1
1 R1
1 R2
1 J4
1 U2
1 C14
1 R3
2 R8, R9
2 R17, R18
2 R4, R11
3 J5, LK3, LK6
3 J1, J2, J3
4 LK1, LK2, LK4, LK5
8 C1, C3, C5, C7, C8, C9, C16, C20
9 TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9
10 C2, C4, C6, C10, C11, C12, C15, C21, C22, C23
17 C13, C17, C18, C19, C24, C25, C26, C27,
R5, R6, R7, R10, R12, R13, R14, R15, R16
Description
Quad, 16-bit/12-bit nanoDAC+ with SPI interface
Quad, 16-bit/12-bit nanoDAC+ with 2 ppm/°C
on-chip reference and SPI interface
High accuracy, ultralow quiescent current LDO, SOT-23
5 V fixed, adjustable low dropout linear voltage
regulator
Ultralow noise XFET 2.5 V voltage reference with
current sink and source capability
Ultralow noise XFET 5.0 V voltage reference with
current sink and source capability
50 Ω SMB jack
Ferrite bead, 600 Ω at 100 MHz
0603, 300 kΩ resistor
Resistor, 1 MΩ, 1%, 0.063W, 0603
120-pin female connector
32K, I²C serial EEPROM (24LC32)
Capacitor, 0603, 1 µF, 10 V
Resistor, 1.5 Ω, 5%, 0.063W, 0603
10 kΩ SMD resistor
100 kΩ SMD resistor
0 Ω resistor, 0805
Terminal block, 8-pin (4 × 2) 0.1" header
2-pin terminal block
Jumper block using 3-pin SIP header
Case A, 10 µF capacitor
Red test point
Capacitor, 0.1 µF, 50 V, 0603
Do not populate (DNP)
Supplier/Part Number
Analog Devices AD5686/AD5684
Analog Devices AD5686R/AD5684R
Analog Devices ADP3331
Analog Devices ADP3367
Analog Devices ADR431
Analog Devices ADR435
FEC 1206013
Digi-Key 490-1024-1-ND
Digi-Key 541-300KHCT-ND
Digi-Key RMCF1/161MFRCT-ND
FEC 1324660 or Digi-Key H1219-ND
FEC 1331330
FEC 318-8840
FEC 9331832
FEC 9330399
FEC 9330402
FEC 9333681
FEC 1022244
FEC 151789
FEC 1022248 and FEC 150410
FEC 197-130
FEC 8731144 (pack)
FEC 8820023
Not Inserted
Rev. 0 | Page 10 of 12