OP220_02 Datasheet, PDF (10/12 Pages) Analog Devices – Dual Micropower Operational Amplifier

OP220
OUTLINE DIMENSIONS
8-Lead Ceramic DIP – Glass Hermatic Seal [CERDIP]
(Q-8)
Dimensions shown in inches and (millimeters)
0.005 (0.13) 0.055 (1.40)
MIN
MAX
8
PIN 1
1
5
0.310 (7.87)
0.220 (5.59)
4
0.100 (2.54) BSC
0.405 (10.29) MAX
0.200 (5.08)
MAX
0.060 (1.52)
0.015 (0.38)
0.320 (8.13)
0.290 (7.37)
0.200 (5.08)
0.125 (3.18)
0.023 (0.58)
0.014 (0.36)
0.150 (3.81)
MIN
0.070 (1.78)
SEATING
PLANE
0.030 (0.76)
15
0
0.015 (0.38)
0.008 (0.20)
CONTROLLING DIMENSIONS ARE IN INCH; MILLIMETERS DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
8-Lead Standard Small Outline Package [SOIC]
Narrow Body
(RN-8)
Dimensions shown in millimeters and (inches)
5.00 (0.1968)
4.80 (0.1890)
8
4.00 (0.1574)
3.80 (0.1497) 1
5
6.20 (0.2440)
4 ^{5.80 (0.2284)}
0.25 (0.0098)
1.27 (0.0500)
BSC
1.75 (0.0688)
1.35 (0.0532)
0.50 (0.0196)
0.25 (0.0099) ^{؋ 45؇}
0.10 (0.0040)
COPLANARITY
0.10
SEATING
PLANE
0.51 (0.0201)
0.33 (0.0130)
8؇
0.25 (0.0098) ^{0؇ 1.27 (0.0500)}
0.19 (0.0075) ^{0.41 (0.0160)}
COMPLIANT TO JEDEC STANDARDS MS-012AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
8-Lead Plastic Dual-in-Line Package [PDIP]
(N-8)
Dimensions shown in inches and (millimeters)
0.375 (9.53)
0.365 (9.27)
0.355 (9.02)
8
5 _{0.295 (7.49)}
0.285 (7.24)
1
4 0.275 (6.98)
0.100 (2.54)
BSC
0.180
(4.57)
MAX
0.150 (3.81)
0.130 (3.30)
0.110 (2.79)
0.022 (0.56)
0.018 (0.46)
0.014 (0.36)
0.015
(0.38)
MIN
SEATING
PLANE
0.060 (1.52)
0.050 (1.27)
0.045 (1.14)
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
0.150 (3.81)
0.135 (3.43)
0.120 (3.05)
0.015 (0.38)
0.010 (0.25)
0.008 (0.20)
COMPLIANT TO JEDEC STANDARDS MO-095AA
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS
(IN PARENTHESES)
8-Lead Metal Can [TO-99]
(H-08)
Dimensions shown in inches and (millimeters)
0.1850 (4.70)
0.1650 (4.19)
0.0400 (1.02) MAX
0.0400 (1.02)
0.0100 (0.25)
REFERENCE PLANE
0.5000 (12.70)
MIN
0.2500 (6.35) MIN _{0.1000 (2.54) BSC}
0.0500 (1.27) MAX
0.1600 (4.06)
0.1400 (3.56)
5
4
0.2000
(5.08)
3
BSC
6
0.0450 (1.14)
7 ^{0.0270 (0.69)}
2
8
0.0190 (0.48)
0.0160 (0.41)
0.0210 (0.53)
0.0160 (0.41)
0.1000
(2.54)
BSC
BASE & SEATING PLANE
1
0.0340 (0.86)
0.0280 (0.71)
45 BSC
COMPLIANT TO JEDEC STANDARDS MO-002AK
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETERS DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
–10–
REV. A