OP186 Datasheet, PDF (10/12 Pages) Analog Devices – 5 uA, Rail-to-Rail Output Operational Amplifier

OP186
50mV
V_S = ؎2.5V
A_V = +1
R_L = 100k⍀
C_L = 50pF
T_A = +25؇C
100␮s
V_S = +5V
T_A = +25؇C
1.0V
200␮s
V_S = ؎1.35V
A_VOL = CIRCUIT
V_IN = ؎1V p-p
R_L =
T_A = +25؇C
500mV
100␮s
Figure 28. Small Signal Transient
Response
1.0V
100␮s
Figure 29. No Phase Reversal
Figure 30. Saturation Recovery Time
V_S = –2.5V
A_VOL = CIRCUIT
V_IN = –1V p-p
R_L =
T_A = +25؇C
Figure 31. Saturation Recovery Time
APPLICATIONS
The OP186 is very similar in design to the OP181. Please see the
OP181/OP281/OP481 data sheet for applications information.
Design of the OP186 was based on the OP181. The major dif-
ference is that the trim structures have been removed. This
results in the offset of the OP186 being higher than the OP181.
There are no other major changes to the circuit. Other perfor-
mance differences, such as the higher bandwidth and slightly
higher supply current, also result from the removal of the trim
resistors.
–10–
REV. 0