UG-112 Datasheet, PDF (1/8 Pages) Analog Devices – Evaluation Board for Single, High Speed Op Amps

SC-70 Evaluation Board User Guide
UG-112
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: [phone] • Fax: [phone] • www.analog.com
Evaluation Board for Single, High Speed Op Amps
Offered in 5-Lead and 6-Lead SC-70 Packages
FEATURES
Enables quick breadboarding/prototyping
User-defined circuit configuration
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits
RoHS compliant
GENERAL DESCRIPTION
The Analog Devices, Inc., SC-70 evaluation board is designed
to evaluate single, high speed op amps offered in 5-lead and 6-lead
SC-70 packages. The evaluation board is a bare board that
enables users to quickly prototype a variety of single op amp
circuits, which minimizes risk and reduces time to market. Figure 1
shows the component side of the bare evaluation board. Figure 2
shows the circuit side of the bare evaluation board.
The 6-layer evaluation board accepts SMA edge-mounted con-
nectors on the inputs and outputs for efficient connection to test
equipment or other circuitry. The ground plane, component
placement, and supply bypassing are designed to minimize
parasitic inductance and capacitance. The evaluation board
components are primarily SMT 0603 case size, with the
exception of the electrolytic bypass capacitors (C1 and C4),
which are 3528 case size.
Figure 3 shows the evaluation board schematic. The PCB
assembly drawings are shown in Figure 4 and Figure 5. The
layout pattern for the PCB is shown in Figure 6 and Figure 7.
EVALUATION BOARD COMPONENT AND CIRCUIT SIDES
Figure 1. Component Side of Evaluation Board
Figure 2. Circuit Side of Evaluation Board
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. B | Page 1 of 8