SSM2220_15 Datasheet, PDF (1/12 Pages) Analog Devices – Audio Dual Matched PNP Transistor

Data Sheet
Audio Dual Matched PNP Transistor
SSM2220
FEATURES
Low voltage noise at 100 Hz, 1 nV/√Hz maximum
High gain bandwidth: 190 MHz typical
Gain at IC = 1 mA, 165 typical
Tight gain matching: 3% maximum
Outstanding logarithmic conformance: rBE = 0.3 Ω typical
Low offset voltage: 200 μV maximum
APPLICATIONS
Microphone preamplifiers
Tape head preamplifiers
Current sources and mirrors
Low noise precision instrumentation
Voltage controlled amplifiers/multipliers
PIN CONNECTION DIAGRAM
SSM2220
TOP VIEW
(Not to Scale)
C₁ 1
B₁ 2
E₁ 3
NC 4
8 C₂
7 B₂
6 E₂
5 NC
NOTES
1. NC = NO CONNECT. THIS PIN IS
NOT CONNECTED INTERNALLY.
Figure 1.
GENERAL DESCRIPTION
The SSM2220 is a dual, low noise, matched PNP transistor, which
has been optimized for use in audio applications.
The ultralow input voltage noise of the SSM2220 is typically only
0.7 nV/√Hz over the entire audio bandwidth of 20 Hz to 20 kHz.
The low noise, high bandwidth (190 MHz), and offset voltage of
(200 μV maximum) make the SSM2220 an ideal choice for demand
ing, low noise preamplifier applications.
The SSM2220 also offers excellent matching of the current gain
(ΔhFE) to about 0.5%, which helps to reduce the high order ampli-
fier harmonic distortion. In addition, to ensure the long-term
stability of the matching parameters, internal protection diodes
across the base to emitter junction were used to clamp any reverse
base to emitter junction potential. This prevents a base to emitter
breakdown condition, which can result in degradation of gain and
matching performance due to excessive breakdown current.
Another feature of the SSM2220 is its very low bulk resistance
of 0.3 Ω typical, which assures accurate logarithmic conformance.
The SSM2220 is offered in 8-lead plastic dual inline (PDIP) and
8-lead standard small outline (SOIC), and its performance and
characteristics are guaranteed over the extended industrial temper-
ature range of −40°C to +85°C.
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
©2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com