HMC1164 Datasheet, PDF (1/10 Pages) Analog Devices – 10.38 GHz to 11.30 GHz MMIC VCO with Half Frequency Output

Data Sheet
10.38 GHz to 11.30 GHz MMIC VCO with
Half Frequency Output
HMC1164
FEATURES
Dual output frequency range
fOUT = 10.38 GHz to 11.30 GHz
fOUT/2 = 5.19 GHz to 5.65 GHz
Power output (POUT): 8 dBm
Single-side band (SSB) phase noise
−86 dBc/Hz typical at 10 kHz
−114 dBc/Hz typical at 100 kHz
No external resonator needed
32-lead, RoHS compliant, 5 mm × 5 mm LFCSP (25 mm²)
APPLICATIONS
Point to point and multipoint radios
Test equipment and industrial controls
Very small aperture terminals (VSATs)
GENERAL DESCRIPTION
The HMC1164 is a monolithic microwave integrated circuit
(MMIC), voltage controlled oscillator that integrates a
resonator, a negative resistance device, and a varactor diode,
and features a half frequency output.
FUNCTIONAL BLOCK DIAGRAM
32 31 30 29 28 27 26 25
NC 1
NC 2
NC 3
NC 4
GND 5
NC 6
NC 7
NC 8
24 NC
23 NC
22 NC
21 VCC
20 NC
19 RFOUT
18 NC
17 NC
9 10 11 12 13 14 15 16
Figure 1.
PACKAGE
BASE
GND
Because of the monolithic construction of the oscillator, the
output power and phase noise performance are excellent over
temperature.
The power output is 8 dBm typical from a 5 V supply voltage.
The voltage controlled oscillator is housed in a RoHS-compliant
LFCSP package and requires no external matching components.
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
©2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com