CN-0134 Datasheet, PDF (1/5 Pages) Analog Devices – Broadband Low Error Vector Magnitude (EVM) Direct Conversion Transmitter

Circuits from the Lab™ tested circuit designs address
common design challenges and are engineered for
quick and easy system integration. For more information
and/or support, visit www.analog.com/CN0134.
Circuit Note
CN-0134
Devices Connected/Referenced
ADF4350 Fractional-N PLL IC with Integrated VCO
ADL5375 Wideband Transmit Modulator
ADP150
Low Noise 3.3 V LDO
ADP3334 Low Noise Adjustable LDO
Broadband Low Error Vector Magnitude (EVM) Direct Conversion Transmitter
EVALUATION AND DESIGN SUPPORT
Circuit Evaluation Boards
CN-0134 Evaluation Board (CFTL-CN0134-EVALZ)
Design and Integration Files
Schematics, Layout Files, Bill of Materials
CIRCUIT FUNCTION AND BENEFITS
This circuit is a complete implementation of the analog portion
of a broadband direct conversion transmitter (analog baseband
in, RF out). RF frequencies from 500 MHz to 4.4 GHz are
supported through the use of a PLL with a broadband
integrated voltage controlled oscillator (VCO). Harmonic
filtering of the LO from the PLL ensures excellent quadrature
accuracy.
5.5V
1µF
ADP150
V_VCO
3.3V
1µF
V_DD
FREF_IN
16 17 28 10 4 26 6 32
V_VCO DV_DD AV_DD CE PDB_RF V_P SDV_DD
1nF 1nF
29 REFIN
51Ω
RF_OUTB+ 14
1 _CLK
RF_OUTB– 15
2 DATA
3 LE
ADF4350
RF_OUTA+ 12
V_VCO
Z_BIAS
4.7kΩ
22 R_SET
RF_OUTA– 13
V_TUNE 20
CP_OUT 7
SW 5
CP_GND SD_{GND AGND} A_GNDVCO D_GND
8
31
9 11 18 21 27
22nF
Z_BIAS
180Ω
330nF
82Ω
10nF
5.5V
1µF
I/Q SMA INPUTS
IBBP
IBBN
ADP3334
1µF
5.0V
VPS1, VPS2
ADL5375
LOIP
LOIN
QUADRATURE
PHASE
SPLITTER
QBBP
QBBN
I/Q SMA INPUTS
Figure 1. Direct Conversion Transmitter (Simplified Schematic: All Connections and Decoupling Not Shown)
RFOUT
Rev. B
Circuits from the Lab™ circuits from Analog Devices have been designed and built by Analog Devices
engineers. Standard engineering practices have been employed in the design and construction of
each circuit, and their function and performance have been tested and verified in a lab environment at
room temperature. However, you are solely responsible for testing the circuit and determining its
suitability and applicability for your use and application. Accordingly, in no event shall Analog Devices
be liable for direct, indirect, special, incidental, consequential or punitive damages due to any cause
whatsoever connected to the use of any Circuits from the Lab circuits. (Continued on last page)
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com/circuits
Fax: [phone]
©2010 Analog Devices, Inc. All rights reserved.