AMP03 Datasheet, PDF (1/8 Pages) Analog Devices – Precision, Unity-Gain Differential Amplifier

a
FEATURES
High CMRR: 100 dB Typ
Low Nonlinearity: 0.001% Max
Low Distortion: 0.001% Typ
Wide Bandwidth: 3 MHz Typ
Fast Slew Rate: 9.5 V/␮s Typ
Fast Settling (0.01%): 1 ␮s Typ
Low Cost
APPLICATIONS
Summing Amplifiers
Instrumentation Amplifiers
Balanced Line Receivers
Current-Voltage Conversion
Absolute Value Amplifier
4 mA–20 mA Current Transmitter
Precision Voltage Reference Applications
Lower Cost and Higher Speed Version of INA105
GENERAL DESCRIPTION
The AMP03 is a monolithic unity-gain, high speed differential
amplifier. Incorporating a matched thin-film resistor network,
the AMP03 features stable operation over temperature without
requiring expensive external matched components. The AMP03
is a basic analog building block for differential amplifier and
instrumentation applications.
The differential amplifier topology of the AMP03 serves to both
amplify the difference between two signals and provide extremely
high rejection of the common-mode input voltage. By providing
common-mode rejection (CMR) of 100 dB typical, the AMP03
solves common problems encountered in instrumentation design.
As an example, the AMP03 is ideal for performing either addi-
tion or subtraction of two signals without using expensive
externally-matched precision resistors. The large common-
mode rejection is made possible by matching the internal resistors
to better than 0.002% and maintaining a thermally symmetric
layout. Additionally, due to high CMR over frequency, the
AMP03 is an ideal general amplifier for buffering signals in a
noisy environment into data acquisition systems.
The AMP03 is a higher speed alternative to the INA105. Fea-
turing slew rates of 9.5 V/µs, and a bandwidth of 3 MHz, the
AMP03 offers superior performance for high speed current
sources, absolute value amplifiers and summing amplifiers than
the INA105.
Precision, Unity-Gain
Differential Amplifier
AMP03
FUNCTIONAL BLOCK DIAGRAM
25k⍀
–IN 2
25k⍀
+IN 3
AMP03
25k⍀
5 SENSE
7 +VCC
6 OUTPUT
25k⍀
4 –VEE
1 REFERENCE
PIN CONNECTIONS
8-Lead Plastic DIP
(P Suffix)
REFERENCE 1
8 NC
–IN 2 ^AMP03 7 V+
TOP VIEW
+IN 3 ^{(Not to Scale)} 6 OUTPUT
V– 4
5 SENSE
NC = NO CONNECT
8-Lead SOIC
(S Suffix)
REFERENCE 1
8 NC
–IN 2 ^AMP03 7 V+
TOP VIEW
+IN 3 ^{(Not to Scale)} 6 OUTPUT
V– 4
5 SENSE
NC = NO CONNECT
Header
(J Suffix)
NC
8
REFERENCE 1
7 V+
–IN 2
6 OUTPUT
+IN 3
5 SENSE
4
V–
NC = NO CONNECT
REV. E
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties
which may result from its use. No license is granted by implication or
otherwise under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] World Wide Web Site: http://www.analog.com
Fax: [phone]
© Analog Devices, Inc., 1999