ADV7533 Datasheet, PDF (1/12 Pages) Analog Devices – MIPI/DSI Receiver

FEATURES
General
Low power MIPI/DSI receiver
Low power HDMI/DVI transmitter ideal for portable
applications
CEC controller and expanded message buffer (3 messages)
reduces system overhead
Incorporates HDMI v.1.3 (x.v.Color™) technology
Compatible with DVI v.1.0
Optional embedded HDCP keys to support HDCP 1.3
1.8 V, 1.2 V (optional), and 3.3 V supplies for ultralow
operating power
Audio inputs accept logic levels from 1.8 V to 3.3 V
MIPI/DSI receiver
2-, 3-, or 4-lane DSI receiver
Supports up to 800 Mbps per lane
Compatible with DPHY V.0.90 and DSI V.1.02
Supports inputs of
16-bit RGB 4:4:4
24-bit RGB 4:4:4
30-bit RGB 4:4:4
HDMI (TMDS) video out
80 MHz operation supports all video and graphics
resolutions from 480i to 1080p at 30 Hz
Programmable 2-way color space converter
Output supports
36-, 30-, or 24-bit RGB 4:4:4
36-, 30-, or 24-bit YCbCr 4:4:4
Automatic input video format timing detection (CEA-861E)
Digital audio
Supports standard S/PDIF for stereo LPCM or compressed
audio up to 192 kHz
2-channel uncompressed LPCM I²S audio up to 192 kHz
Special features for easy system design
On-chip MPU with I²C master to perform EDID reading and
HDCP operations; reports HDMI events through interrupts
and registers
5 V tolerant I²C and HPD I/Os, no extra device needed
No audio master clock needed for supporting S/PDIF
and I²S
MIPI/DSI Receiver
with HDMI Transmitter
ADV7533
APPLICATIONS
Mobile systems
Cellular handsets
Digital video cameras
Digital still cameras
Personal media players
Gaming
GENERAL DESCRIPTION
The ADV7533 is a multifunction video interface chip. The
ADV7533 provides a mobile industry processor interface/
display serial interface (MIPI®/DSI) input port, a high definition
multimedia interface (HDMI®) data output in a 49-ball wafer
level chip scale package (WLCSP). The display serial interface
(DSI) input provides up to four lanes of MIPI/DSI data, each
running up to 800 Mbps. The DSI Rx implements DSI video
mode operation only. The HDMI Tx supports video resolutions
using pixel clocks of up to 80 MHz.
With the optional inclusion of embedded HDCP keys, the
ADV7533 allows the secure transmission of protected content,
as specified by the HDCP 1.3 protocol.
The ADV7533 supports x.v.Color™ (gamut metadata) for a
wider color gamut.
The ADV7533 supports both S/PDIF and 2-channel I²S audio.
Its high fidelity 2-channel I²S can transmit stereo up to a 192 kHz
sampling rate. The S/PDIF can carry stereo LPCM audio or
compressed audio, including Dolby® Digital and DTS®.
The ADV7533 helps to reduce system design complexity and
cost by incorporating such features as an I²C master for EDID
reading and 5 V tolerance on the I²C and Hot Plug™ detect pins.
Fabricated in an advanced CMOS process, the ADV7533 is
available in a space saving, 49-ball, WLCSP surface mount
package. This package is RoHS compliant and specified to
operate from −10°C to +85°C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2011 Analog Devices, Inc. All rights reserved.