ADUM6201CRWZ Datasheet, PDF (1/28 Pages) Analog Devices – Dual-Channel, 5 kV Isolators with Integrated DC-to-DC Converter

Data Sheet
Dual-Channel, 5 kV Isolators with
Integrated DC-to-DC Converter
ADuM6200/ADuM6201/ADuM6202
FEATURES
FUNCTIONAL BLOCK DIAGRAMS
isoPower integrated, isolated dc-to-dc converter
Regulated 5 V or 3.3 V output
Up to 400 mW output power
Dual dc-to-25 Mbps (NRZ) signal isolation channels
16-lead SOIC wide body package version
16-lead SOIC wide body enhanced creepage version
High temperature operation: 105°C maximum
Safety and regulatory approvals
UL recognition
5000 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice #5A
IEC 60601-1: 250 V rms, 8 mm package (RI-16-1)
IEC 60950-1: 400 V rms, 8 mm package (RI-16-1)
VDE certificate of conformity (RW-16)
IEC 60747-5-2 (VDE 0884 Part 2):2003-01
VIORM = 846 V peak
VDE certificate of conformity, 8 mm package (RI-16-1)
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
VIORM = 846 V peak
APPLICATIONS
V_DD1 1
OSCILLATOR
RECTIFIER REGULATOR 16 V_ISO
GND₁ 2
V_IA/V_OA 3
V_IB/V_OB 4
RC_IN 5
RC_SEL 6
V_E1/NC 7
GND₁ 8
2-CHANNEL iCOUPLER CORE
ADuM6200/
ADuM6201/
ADuM6202
15 GND_ISO
14 V_IA/V_OA
13 V_IB/V_OB
12 NC
11 V_SEL
10 V_E2/NC
9 GND_ISO
NC = NO CONNECT
Figure 1.
V_IA
3
V_OA
14
ADuM6200
V_IB
V_OB
4
13
Figure 2. ADuM6200
RS-232/RS-422/RS-485 transceivers
Industrial field bus isolation
Isolated sensor interfaces
Industrial PLCs
GENERAL DESCRIPTION
The ADuM6200/ADuM6201/ADuM6202¹ are dual-channel
digital isolators with isoPower®, an integrated, isolated dc-to-dc
converter. Based on the Analog Devices, Inc., iCoupler® technology,
the dc-to-dc converter provides up to 400 mW of regulated, iso-
lated power at either 5.0 V or 3.3 V from a 5.0 V input supply, or
at 3.3 V from a 3.3 V supply at the power levels shown in Table 1.
These devices eliminate the need for a separate, isolated dc-to-dc
converter in low power, isolated designs. The iCoupler chip scale
transformer technology is used to isolate the logic signals and for
the magnetic components of the dc-to-dc converter. The result
is a small form factor, total isolation solution.
The ADuM6200/ADuM6201/ADuM6202 isolators provide two
independent isolation channels in a variety of channel configura-
tions and data rates (see the Ordering Guide for more information).
V_IA
3
V_OA
14
ADuM6201
V_OB
V_IB
4
13
Figure 3. ADuM6201
V_OA
3
V_IA
14
ADuM6202
V_OB
V_IB
4
13
Figure 4. ADuM6202
Table 1. Power Levels
Input Voltage (V) Output Voltage (V)
5.0
5.0
5.0
3.3
3.3
3.3
Output Power (mW)
400
330
132
isoPower uses high frequency switching elements to transfer power
through its transformer. Special care must be taken during printed
circuit board (PCB) layout to meet emissions standards. See the
AN-0971 Application Note for board layout recommendations.
1 _{Protected by U.S. Patents 5,952,849; 6,873,065; 6,903,578; and 7,075,329; other patents are pending.}
Rev. C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone] ©2010–2012 Analog Devices, Inc. All rights reserved.