ADUM6010 Datasheet, PDF (1/16 Pages) Analog Devices – The ADuM60101 is an integrated, isolated dc-to-dc converter.

Data Sheet
FEATURES
isoPower integrated, isolated dc-to-dc converter
Regulated 3.15 V to 5.25 V output
Up to 150 mW output power
20-lead SSOP package with 5.3 mm creepage
High temperature operation: 105°C
High common-mode transient immunity: >25 kV/µs
Safety and regulatory approvals
UL recognition (pending)
3750 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice #5A (pending)
VDE certificate of conformity (pending)
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
VIORM = 849 V peak
APPLICATIONS
Power supply start-up bias and gate drives
Isolated sensor interfaces
Industrial PLCs
GENERAL DESCRIPTION
The ADuM6010¹ is an integrated, isolated dc-to-dc converter.
Based on the Analog Devices, Inc., iCoupler® technology, the
dc-to-dc converter provides regulated, isolated power, adjustable
between 3.15 V and 5.25 V. Input supply voltages can range
from slightly below the required output to significantly higher.
Popular combination and their associated power levels are shown
in Table 1.
The iCoupler chip-scale transformer technology is used for isolated
logic signals and for the magnetic components of the dc-to-dc
converter. The result is a small form factor, total isolation
solution.
isoPower uses high frequency switching elements to transfer
power through its transformer. Special care must be taken
during printed circuit board (PCB) layout to meet emissions
standards. See the AN-0971 Application Note for board layout
recommendations.
Integrated DC-to-DC Converter
ADuM6010
FUNCTIONAL BLOCK DIAGRAM
NC 1
GND_P 2
NC 3
NC 4
GND_P 5
GND_P 6
NC 7
PDIS 8
V_{DDP 9}
GND_{P 10}
PCS
OSC
ADuM6010 20 NC
19 GND_ISO
18 NC
17 NC
16 GND_ISO
15 GND_ISO
14 NC
13 V_SEL
1.25V 12 _VISO
RECT REG
11 GND_ISO
Figure 1.
Table 1. Power Levels
Input Voltage (V) Output Voltage (V)
5
5
5
3.3
3.3
3.3
Output Power (mW)
150
100
100
1 _{Protected by U.S. Patents 5,952,849; 6,873,065; 6,903,578; and 7,075,329. Other patents are pending.}
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone] ©2012–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com