ADUM5400_08 Datasheet, PDF (1/16 Pages) Analog Devices – Quad-Channel Isolator with Integrated DC-to-DC Converter

FEATURES
isoPower integrated, isolated dc-to-dc converter
Regulated 5 V output
500 mW output power
Quad dc-to-25 Mbps (NRZ) signal isolation channels
Schmitt trigger inputs
16-lead SOIC package with >8 mm creepage
High temperature operation: 105°C maximum
High common-mode transient immunity: >25 kV/μs
Safety and regulatory approvals
UL recognition
2500 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice #5A (pending)
VDE certificate of conformity (pending)
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
VIORM = 560 V peak
APPLICATIONS
RS-232/RS-422/RS-485 transceivers
Industrial field bus isolation
Power supply start-up bias and gate drives
Isolated sensor interfaces
Industrial PLCs
Quad-Channel Isolator with
Integrated DC-to-DC Converter
ADuM5400
GENERAL DESCRIPTION
The ADuM5400¹ device is a quad-channel digital isolator with
isoPower®, an integrated, isolated dc-to-dc converter. Based on
the Analog Devices, Inc., iCoupler® technology, the dc-to-dc
converter provides up to 500 mW of regulated, isolated power
with 5.0 V input and 5.0 V output voltages. This architecture
eliminates the need for a separate, isolated dc-to-dc converter in
low power, isolated designs. The iCoupler chip scale transformer
technology is used to isolate the logic signals and the magnetic
components of the dc-to-dc converter. The result is a small
form factor, total isolation solution.
The ADuM5400 isolator provides four independent isolation
channels in two speed grades (see the Ordering Guide for more
information).
isoPower uses high frequency switching elements to transfer
power through its transformer. Special care must be taken
during printed circuit board (PCB) layout to meet emissions
standards. Refer to the AN-0971 application note for details
on board layout recommendations.
FUNCTIONAL BLOCK DIAGRAM
V_DD1 1
GND₁ 2
V_IA 3
V_IB 4
V_IC 5
V_ID 6
V_DDL 7
GND₁ 8
OSC
RECT REG
4-CHANNEL iCOUPLER CORE
ADuM5400
16 V_ISO
15 GND_ISO
14 V_OA
13 V_OB
12 V_OC
11 V_OD
10 V_ISO
9 GND_ISO
Figure 1.
1 _{Protected by U.S. Patents 5,952,849; 6,873,065; 6,903,578; and 7,075,329; other patents pending.}
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2008 Analog Devices, Inc. All rights reserved.