ADUM5400 Datasheet, PDF (1/21 Pages) Analog Devices – Quad-Channel Isolator with Integrated DC-to-DC Converter

Preliminary Technical Data
FEATURES
isoPower integrated, isolated dc-to-dc converter
Regulated 3.3 V or 5 V output
500 mW output power
Quad dc-to-25 Mbps (NRZ) signal isolation channels
Schmitt trigger inputs
16-lead SOIC package with >8 mm creepage
High temperature operation: 105°C
High common-mode transient immunity: >25 kV/μs
Safety and regulatory approvals (pending)
UL recognition
2500 V rms for 1 minute per UL1577
CSA Component Acceptance Notice #5A
VDE certificate of conformity
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
VIORM = 560 V peak
APPLICATIONS
RS-232/RS-422/RS-485 transceiver
Industrial field bus isolation
Power supply startup bias and gate drive
Isolated sensor interface
Industrial PLC
GENERAL DESCRIPTION
The ADuM5400¹ device is a quad-channel digital isolators with
isoPower™, an integrated, isolated dc-to-dc converter. Based on
the Analog Devices, Inc., iCoupler® technology, the dc-to-dc
converter provides up to 500 mW of regulated, isolated power at
either 5.0 V from a 5.0 V input supply or 3.3 V from a 3.3 V supply.
This eliminates the need for a separate, isolated dc-to-dc
converter in low power, isolated designs. The iCoupler chip scale
transformer technology is used
to isolate the logic signals and the magnetic components of the
dc-to-dc converter. The result is a small form factor, total isolation
solution.
The ADuM5400 isolator provides four independent isolation
channels in a variety of channel configurations and data rates
(see the Ordering Guide for more information).
1 _{Protected by U.S. Patents 5,952,849; 6,873,065; and 7075 329 B2. Other}
patents pending.
Quad-Channel Isolator with
Integrated DC-to-DC Converter
ADuM5400
FUNCTIONAL BLOCK DIAGRAMS
Figure 1.
Figure 2. ADuM5400
Rev. PrA
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
www.analog.com
Fax: [phone]
©2008 Analog Devices, Inc. All rights reserved.