ADUM210N Datasheet, PDF (1/15 Pages) Analog Devices – 5.0 kV rms, Single-Channel Digital Isolator

Data Sheet
5.0 kV rms, Single-Channel Digital Isolator
ADuM210N
FEATURES
High common-mode transient immunity: 100 kV/μs
High robustness to radiated and conducted noise
Low propagation delay
13 ns maximum for 5 V operation
15 ns maximum for 1.8 V operation
150 Mbps maximum data rate
Safety and regulatory approvals (pending)
UL recognition
5000 V rms for 1 minute per UL 1577
CSA Component Acceptance Notice 5A
VDE certificate of conformity
DIN V VDE V 0884-10 (VDE V 0884-10):2006-12
VIORM = 849 V peak
CQC Certification per GB4943.1-2011
Low dynamic power consumption
1.8 V to 5 V level translation
High temperature operation: 125°C maximum
Fail-safe high or low options
8-lead, RoHS-compliant, SOIC_IC package
APPLICATIONS
General-purpose single-channel isolation
Industrial field bus isolation
GENERAL DESCRIPTION
The ADuM210N¹ is a single-channel digital isolator based on
Analog Devices, Inc., iCoupler® technology. Combining high
speed, complementary metal-oxide semiconductor (CMOS)
and monolithic air core transformer technology, this isolation
component provides outstanding performance characteristics,
superior to alternatives such as optocoupler devices and other
integrated couplers. The maximum propagation delay is 13 ns
with a pulse width distortion of less than 3 ns at 5 V operation.
The ADuM210N supports data rates as high as 150 Mbps with a
withstand voltage rating of 5.0 kV rms (see the Ordering Guide).
The device operates with the supply voltage on either side ranging
from 1.8 V to 5 V, providing compatibility with lower voltage
systems as well as enabling voltage translation functionality
across the isolation barrier.
Unlike other optocoupler alternatives, dc correctness is ensured
in the absence of input logic transitions. Two different fail-safe
options are available, in which the outputs transition to a pre-
determined state when the input power supply is not applied or
the inputs are disabled.
V_DD1 1
V_{I 2}
(DATA IN)
V_DD1 3
GND₁ 4
FUNCTIONAL BLOCK DIAGRAM
E
D
N
E
C
C
O
O
D
D
E
E
8 V_DD2
7 GND₂
6 ^VO
(DATA OUT)
ADuM210N
Figure 1.
5 GND₂
1 _{Protected by U.S. Patents 5,952,849; 6,873,065; 6,903,578; and 7,075,329. Other patents are pending.}
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: [phone]
©2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com