English
Language : 

ADUCM330 Datasheet, PDF (1/16 Pages) Analog Devices – Dual channel, simultaneous sampling
Data Sheet
Integrated, Precision Battery Sensor for
Automotive Systems
ADuCM330/ADuCM331
FEATURES
Memory
High precision analog-to-digital converters (ADCs)
Dual channel, simultaneous sampling
I-ADC 20-bit Σ-Δ (minimizes range switching)
VADC/TADC 20-bit Σ-Δ
Programmable ADC conversion rate from 1 Hz to 8 kHz
On-chip ±5 ppm/°C voltage reference
Current channel
Fully differential, buffered input
Programmable gain (from 4 to 512)
ADC absolute input range: −200 mV to +300 mV
Digital comparator with current accumulator feature
Voltage channel
Buffered, on-chip attenuator for 12 V battery input
Temperature channel
External and on-chip temperature sensor options
Microcontroller
ARM Cortex-M3 32-bit processor
16.384 MHz precision oscillator with 1% accuracy
Serial wire download (SWD) port supporting code
download and debug
Automotive qualified integrated local interconnect network
(LIN) transceiver
96 kB (ADuCM330)/128 kB (ADuCM331) Flash/EE memory, ECC
6 kB SRAM, ECC
4 kB data Flash/EE memory, ECC
10,000 cycle Flash/EE endurance
20 year Flash/EE retention
In circuit download via SWD and LIN
On-chip peripherals
Serial port interface (SPI)
General-purpose input/output (GPIO) port
General-purpose timer
Wake-up timer
Watchdog timer
On-chip, power-on reset
Power
Operates directly from 12 V battery supply
Power consumption, 8 mA typical (16 MHz)
Low power monitor mode
Package and temperature range
32-lead, 6 mm × 6 mm LFCSP
Fully specified for −40°C to +115°C operation; additional
specifications for 115°C to 125°C
Qualified for automotive applications
LIN 2.2-compatible slave, 100 kb fast download option
SAE J-2602-compatible slave
Low electromagnetic emissions (EME)
High electromagnetic immunity (EMI)
APPLICATIONS
Battery sensing/management for automotive and light
mobility vehicles
Lead acid battery measurement for power supplies in
industrial and medical domains
FUNCTIONAL BLOCK DIAGRAM
SWDIO
SWCLK
IIN+
IIN–
VBAT
VTEMP
GND_SW
PRECISION ANALOG ACQUISITION
PGA
BUF
20-BIT
ADC
RESULT
DIGITAL
ACCUMULATOR COMPARATOR
MUX BUF
20-BIT
ADC
TEMPERATURE PRECISION
SENSOR
REFERENCE
ADuCM330/ADuCM331
LDO
POR
MEMORY
96kB (ADuCM330)/
128kB (ADuCM331)
FLASH,
6kB SRAM,
4kB DATA
CORTEX-M3
PROCESSOR
16MHz
PREC OSC 1%
LPM
1 × GP TIMER
WD TIMER
W/U TIMER
GPIO PORT
SPI PORT
LIN
RESET
LIN
Figure 1.
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice.
No license is granted by implication or otherwise under any patent or patent rights of Analog
Devices. Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
©2015 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com